Brief Biographical Data

Name:

Prof. Dr. Mohamed Ragab Bayoumi

 

Title and Position:

Professor of Production Engineering and Mechanical Design    ( Engineering Materials),

Vice - President of Assiut University for Postgraduate Studies and

Research Affairs, Assiut University, Assiut, Egypt.

Date and Place of Birth:

 

October 11, 1951, Egypt.

 

Marital Status:

 

Married and four dependent

 

Languages:

 

Arabic, English, French

 

Address:

 

Administration Building of Assiut University,

Assiut University,  Assiut, Egypt         Post No.71515

OR

Mechanical Engineering Department, Faculty of Engineering, Assiut University, Assiut, Egypt.

 

Telephone:

 

+2 (088) 2314132, 
 +2 (088) 2300940       

  (Home).

+2 (088) 2355150,
+2 (088)2357800,
 +2 (088) 2411498.  

 (Office).

+2012/7370779                                                                          

(Mobile).

Fax:

 

+2 (088) 2357800,  +2 (088) 2314132

 

E- Mail:

rbayoumi@aun.edu.eg   &  mrb@aun.edu.eg

mbayoumi_eg@yahoo.com

 

 Education:

¨   B.Sc. with honor degree, in June 1974 from Mechanical Engineering Department, Assiut University, Assiut, Egypt.

¨   M. Sc degree in June 1978 from Mechanical Engineering Department, Assiut University, Assiut, Egypt.

¨   Ph.D. Degree, in May 1984 from Mechanical Engineering Department, University of Manitoba, Manitoba, Canada. 

Specialization:                  

Engineering Materials and Their Applications in Production Engineering and Mechanical Design. 

Experience:

 ¨   From October 1974 to October 1978 - Demonstrator (teaching and research assistant) at the Mechanical Engineering Department, Assiut University, Assiut, Egypt.

¨   From October 1978 to January 1981 - Assistant Lecturer at the Mechanical Engineering Department, Assiut University, Assiut, Egypt.

¨   From January 1981 to October 1983 - Teaching and Research Assistant at the Mechanical Engineering Department, University of Manitoba, Manitoba, Canada.

¨   From October 1983 to October 1986 - Research Associate at the Mechanical Engineering Department, University of Manitoba, Manitoba, Canada.

¨   From October 1986 to December 1991 - Assistant Professor at the Mechanical Engineering Department, Assiut University, Assiut, Egypt.

¨   From June 1987 to October 1987 - Visiting scientist at the Mechanical Engineering Department, University of Manitoba, Manitoba, Canada.

¨   From February 1989 to September 1992 - Assistant Professor at the Department of Production Engineering and Mechanical Systems Design, King Abdulaziz University, Jeddah, Saudi Arabia.

¨   From September 1989 to February 1994 - Associate Professor at the Department of Production Engineering and Mechanical Systems Design, King Abdulaziz University, Jeddah, Saudi Arabia.

¨   From December 1991 to January 1997 - Associate Professor at the Mechanical Engineering Department, Assiut University, Assiut, Egypt.

¨   From January 1997 to Now - Professor at the Mechanical Engineering Department, Assiut University, Assiut, Egypt.

¨   From January 1998 to August 2000 - Vice - Dean of Sugar Technology Research Institute, Assiut University, Assiut, Egypt.

¨      From August 2000 to September 2006 - Dean of Sugar Technology Research Institute, Assiut University, Assiut, Egypt.

¨      From September 2006 to Now - Vice - President of Assiut University for Postgraduate Studies and Research Affairs, Assiut University, Assiut, Egypt. 

Areas of Interest: 

¨      Engineering Materials and their Applications.

¨   Production Engineering and Mechanical Design.

¨   Failure Analysis and Fault Diagnosis.

¨   Metal Forming.

¨   Fracture, Fatigue and Corrosion.

¨   Cracks in Engineering Materials, Weldments and Mechanical Systems.

¨   Sugar Technology and Factory Planing. 

Awards and Prizes:

¨   University of Manitoba Postdoctoral Fellowship; 1984 - 1985, Winnipeg, Manitoba, Canada.

¨   Distinction Award; 1969 - 1974 Undergraduate Level. Donor; Egyptian Government.

¨   Secondary School Certificate Prize; 1969, Elminia Governorate, Elminia, Egypt. 

Membership in Professional Societies :

¨      Member - Egyptian Engineers Cendicate.

¨      Member - Egyptian Welding Society.

¨      Member - Association of Professional Engineers of the Province of Manitoba, Canada.

¨      Member - The New Yourk Academy of Sciences.

¨      Member - The American Society of Mechanical Engineers. 

Leadership Responsibilities / Activities :

¨ Vice - President of Assiut University for Postgraduate Studies and Research Affairs.

¨   Chairman of:

1.      The Genetic Engineering & Molecular Biology Research Center.

2.      Center for Translation and Linguistic Research.

3.      Assiut University Network.

4.      Electron Microscope Unit. 

5.      Assiut University Mycological Center AUMC.

6.      Center of Drug Discovery "CDR".

7.      Microfilm Documentation and Databases Unit.

8.      Assiut University Unit of Trace Analyses.

¨   Supervisor of Faculty of Agriculture( Its Financial Affairs and management) Assiut University.

¨   Supervisor of Cars Management of Assiut University.

¨   Dean - Sugar Technology Research Institute at Assiut University.

¨   Vice - Dean of Sugar Technology Research Institute at Assiut University.

¨   Consultant for Egypt Aluminum Company, Egypt from 1988 - 1989.

¨   Consultant for Assiut University President for Libraries Affairs.

¨   Member - Consultancy office of the Faculty of Engineering at Assiut University.

¨   Member - Committee for Basic Sciences Sector at the Supreme Council of Egyptian Universities.

¨   Member - Board of directors of the Production Workshop unit at Assiut University.

¨   Member - Center for south valley Development at Assiut University.

¨   Member - Board of directors of the Electron Microscope Unit at Assiut University.

¨   Member - Committee for Graduate Studies and Scientific Research at Assiut University.

¨   Member - Committee for Environmental Affairs and Community Development at Assiut University.

¨      Principal Investigator for different Scientific Research Industrial and Higher Education Development Projects.

¨      Main Coordinator \ Supervisor of Creating the “World Bank Public Information Center at Assiut University”.  

Conferences : 

¨   Attendance and presentation of scientific papers in 35 International Conferences.

¨   Member of the Organizing and Steering Committee for 19 International Conferences.

¨   Refree for the research papers submitted for 12 International Conferences.

¨   General Secretary for 8 International Conferences. 

Publications :

¨     (99) Scientific Research are published in International Journals, periodicals and Conferences Proceedings.

¨     Book published in Arabic and entitled “ Engineering Drawing (الرسم الهندسى) ” by M.A. Mansour, M.K. Bedwi, M.R. Bayoumi, M.A. Hamid and A.K. Abdelatif (1992).

¨   (28) Technical and Scientific reports for different financially supported Scientific and Higher Education Development projects submitted for different factories, companies, and national / international Governmental Agencies.

¨   Book published in Arabic and entitled “Principles of Production Technology     (مبادىء تكنولوجيا الإنتاج), “ by M. G. El-Sebaie, O. I. El-Ganiny , M. R. Bayoumi and A. A. Nasser.

¨   Book published in Arabic and entitled “ History of Engineering Sciences            (تاريخ العلوم الهندسية)”, by M. A. Ashour, M. R. Bayoumi, A. M. Ghania, N. Abdel-Gayed.

¨   Book published in Arabic and entitled “Guide for the use of Internet for Scientific Research and Information Searching,

      (دليل استخدام شبكة الانترنت فى البحث العلمى و البحث عن المعلومات)” by M. R. Bayoumi and M. R. Mahmoud, Assiut University publishing and Distribution Center, 2002. 

Teaching Experience:

¨   I have offered many teaching Undergraduate and graduate as well as training courses in Egypt, Canada, Saudi Arabia and United Emirates.

¨   Training Courses and Continuous education programs have been offered for:

·  Egypt Aluminum Company.

·  Egypt Sugar and Integrated Industries Company.

·  Assiut Cement Company, Egypt.

·  Assiut Fertilizer Factory, Egypt.

·  Assiut Petroleum Refinery Company, Egypt.

·  Abo-Dubi Gas Liquification Company (ADGAS), United Emirates.

·  Sadat Academy for Management Sciences, Egypt.

·  Assiut University Electron Microscope Unit, Egypt.

·  Spring School on “ Current Activities in Materials Science ” Assiut University, Assiut, Egypt.

¨      I am supervising 13 M. Sc. thesis (7 of them were awarded and 6  of them are in progress) as well as supervising 4 Ph.D. thesis (2 of them were awarded and 2 of them are in progress). 

References: 

                                                Will be furnished upon request.                            

 

1.   M.R. Bayoumi and M.G. El-Sebaie, “Pressure Assisted Deep Drawing of Sheet Metals considering the Effect of Friction ” Bulletin of the Faculty of engineering Assiut University, Egypt, Vol. 6, part 2, (1977). 

2.   M.R. Bayoumi and M.G. El-Sebaie, “ Deep Drawing of Semi-Conical Headed Shells into a High Pressure Medium ”, First Conference for Theoretical and Applied Mechaniics, Cairo, A. R. E. , Academy of Scientific Research and Technology, pp. 224 - 232., December 16 - 18, (1980). 

3.   M.R. Bayoumi and M. G. El-Sebaie, “ Deep- Drawing of Conical Headed Shells into a High Pressure Medium ”, Bander Bleeche Rohre, pp. 545-547, December (1980). 

4.   M.R. Bayoumi and M.G. El-Sebaie, “Deep- Drawing of Hemispherical Headed Shells into a High Pressure Medium, Current Advances in Mechanical Design and Production”, G. S. A. Shawki and S. M. Metwalli, Eds., Pergamon Press, pp. 257-267, (1981) . 

5.   M. R.  Bayoumi and M. N. Bassim,   “ Temperature Dependence of Fracture Toughness ( JIC) and Ductility for BCC Materials in the Transition Region ”, International Journal of Fracture, Vol. 23, No. 5, pp. 259 - 269, (1983). 

6.   M. R. Bayoumi, J. Klepaczko and M. N. Bassim, “ Determination of Fracture Toughness JIC under Quasi-Static and Dynamic Loading Conditions Using Wedge Loaded Specimens”, Journal of Testing and Evaluation, Vol. 12, No. 5, pp. 316-323, (1983). 

7.   M. R. Bayoumi and M. N.  Bassim,  “ Experimental Correlation Between Ductility and J- Integral in the Transition Region of 1045 Steel ”, Journal of Engineering Fracture Mechanics, Vol. 18, No. 3, pp. 679-691, (1983). 

8.   M. R. Bayoumi and M. N. Bassim, “ Strain Rate Dependence of Fracture Toughness JIC and Ductility ”, Proceedings of Canadian Fracture Conference- CFCIO, University of Waterloo, pp. 173 -181, (1983). 

9.   M. R. Bayoumi, J. Klepaczko and M.N. Bassim, “ Study of the Relationship Between Fracture Toughness (JIC) and Bulge Ductility  ”, International Journal of Fractures, Vol. 23, No. 1, pp. 71-79, (1983). 

10. M. R. Bayoumi and M. N. Bassim, “ Stretch Zone, Ductility and Toughness Studies in the Transition Region of 1045 Steel”, Proceedings of the International Conference of Meterials, ICM4, Stockholm, Sweden, Vol. 2, pp. 803-811, (1983). 

11. M. R. Bayoumi, “Deep Drawing of Anisotropic Work-Hardening Sheet Metals into a High Pressure Medium ”, Journal of Testing and Evaluation, Vol. 12, No. 6, pp. 353-363, (1984). 

12. D. Shum, M. R. Bayoumi, and M.N. Bassim, “ New Methods in Dynamic Fracture Characterization ”, presented at the 22nd Annual Meeting, Society of Engineering Science, Inc., October 7-9, (1985). 

13. D. Shum, M. N. Bassim and M. R. Bayoumi, “Dynamic Tensile Fracture Toughness Evaluation Using Compact Tension Specimens ”, International Journal of Fracture, Vol. 29, pp. R3-R10, (1985). 

14. M.N. Bassim D. Shum,  S.Yannacopoulos, M.R. Bayoumi and M. C. Chaturvedi                  “ Metallurgical Aspects of the Wheel/Rail Surface Contact ”, in the Proceedings of International Conference on Surface Modification and Coatings, Metal Congress, Toronto, October (1985). 

15. R.J. Klassen, M.N. Bassim M. R. Bayoumi and H.G.F. Wilsdorf, “Dislocation Cell Structures Networks during Ductile Fracture of HSLA Steels”, presented at Canadian Metal Physics Conference, Kingston, June (1985).

16. M. R. Bayoumi and M.N. Bassim “ Mechanisms of Dynamic Fracture in 1045 Steel ”, Proceedings of the 7th International Conference on the Strength of Metals and Alloys, Concordia University, Montreal, Vol. 2, pp. 1181-1186, Aug. (1985). 

17. M.N. Bassim and M.R. Bayoumi, “On Observation of Dislocation Networks During Fracture of Prestrained 4340 Steel”, Proceedings of the International Conference on Low-Energy Dislocation Structures ”, University of Virginia, August 10-13, pp. 317-324, (1986). 

18. M.R. Bayoumi and M.N. Bassim, “Effect of Microstructure on the Relationship Between Fracture Toughness and Ductility”, Engineering Fracture Mechanics Vol. 24, No. 1, pp. 111-120, (1986). 

19. M. N. Bassim and M.R. Bayoumi “The Observation of Dislocation Structures During the Fracture of Prestrained AISI 4340 Steel”, Materials Science and Engineering Vol. 81, pp. 317-324, (1986). 

20. M.N. Bassim, G. Gadzella, G. Stacey, J. Cuddy and M. R. Bayoumi , “Characterization of Acoustic Emission from A Model Economizer Header Flow Noise”, Acoustic Emission Group Meeting Kingston, Ontario, Canada,. June (1986). 

21. M.N. Bassim, M.R. Bayoumi, T. R. Hus and J.R.  Matthews, “Investigation of Dynamic J 1d for Alloy Steel Weldments Using the Split Hopkinson Bar “. Journal of Testing and Evaluation, Vol. 14, No. 5, pp. 229-235, (1986).  

22. R. J.  Klassen, M. N.  Bassim, M.R. Bayoumi and H.G.F. Wilsdorf, “ Characterization of the Effect of Alloying Elements on the Fracture Toughness of High Strength, Low Alloy Steels ”, Materials Science and Engineering, Vol. 80, No. 1, pp. 25-35, (1986). 

23. R. J. Klassen, M.N. Bassim, M.R. Bayoumi and H.G.F. Wilsdorf, “Mechanisms of Plastic Deformation Prior to Ductile Fracture in a Low Alloy Steel”, Materials Science and Engineering, Vol. 83, No. 1, pp. 39-44, (1986). 

24. G.M.Gadzella, G. Stacey, J.Cuddy, M.N.Bassim and M.R.Bayoumi “A Software Approach for Acquisition and Analysis of large Numbers of Acoustic Emission Signals” Presented at Acoustic Emission Group Meeting, Kingston. Ontario, Canada, June (1986). 

25. M. N. Bassim, M.R. Bayoumi and D.Shum, “ Study of the Variation of Fracture Toughness Under Spectrum Loading Using CT Specimens”, Engineering Fracture Mechanics, Vol. 26, No. 4, pp. 619-623, (1987). 

26. M.N. Bassim, R.J. Klassen, M.R. Bayoumi and H.G.F. Wilsdorf, “ Fracture Topography of HSLA Steels” Journal of Meterials Science and Engineering, Vol. 91, pp. 107-116,  (1987). 

27. A.A. Khalil, M.R. Bayoumi and A.G. Abd-El-Shafi, “Friendly User Super BASIC Finite Element Program for Solving Design and Structure Problems Using Personal Computer”, Proceedings of ISMM International Symposium on “Microcomputers and Their Applications, MIMT87, Cairo, Egypt, March 3-5, (1987). 

28. M.N. Bassim and M.R. Bayoumi, “Ductile Fracture Evaluation Under Impact Loading”, Proceedings of the International Conference on Impact Loading and dynamic Behavior of Materials, Bremen, Federal Republic of Germany, May 18-22, (1987). 

29. M.R. Bayoumi “Topographical and Microstructural Changes During the Fracture of Prestrained High Strength Low Alloy Steel”, Proceedings of the Second International Ain-Shams University Conference on Production Engineering and Design for Development, Cairo, Egypt, Vol. 2, pp. 289-297, December 29-31, (1987). 

30. M.R. Bayoumi, “On the Development of Plastic Zone and Crack Growth of Short Crack at Notches in Biaxial. Fatigue”, Bulletin of the Faculty of Engineering, Assiut University, Egypt Vol. 17, Part pp. 115-128, (1987). 

31. A. A. Naser, S. M. Morsy and M.R. Bayoumi “Dependence of Corrosion Behavior of Stainless Steel on Surface Roughness under Different Temperatures and NaCL Concentration ”, Bulletin of the Faculty of Engineering, Assiut University, Egypt Vol. 16, Part 2, pp 105-120, (1987). 

32. M.R. Bayoumi, “Study Of Small Scale Plasticity and Stress Distribution Preceding Crack Propagation in Metals”, Bulletin of the Faculty of Eng. Assiut University, Egypt, Vol. 16, Part 2, pp. 121-138, (1988). 

33. M.R. Bayoumi “Characterization of Fracture Toughness of High Strength Low Alloy Steel Weldments Using Stretch Zone Width Measurements ”, Bulletin of the Faculty of Engineering, Assiut University, Egypt, Vol. 17, Part 1, pp 22-30, (1989). 

34. M. R. Bayoumi, “Characterization of Fracture Toughness of High Strength Low Alloy Steel Weldments Using Stretch Zone Width Measurements”, Journal of Materials Science, Vol. 25, pp 4301-4308, (1990). 

35. S.M.H. Darwish A. Abd El-Mageed and M.R. Bayoumi “Computer Aided Design of, Aluminum Holding Furnaces ”, Proceedings of the Third International Ain shams University Conference on Production Engineering and Design Cairo, Egypt, Vol. 1, pp, 53-62, (1990). 

36. M. R. Bayoumi, “Towards a Prediction of the Hardness of the Heat-Affected Zone of Steel Weldments”, Journal of Materials Science, Vol. 26, pp 2716-2724, (1991). 

37. A.A.Khalil and M.R. Bayoumi, “Effect of Loading Rate on Fracture Toughness of Bonded Joints”, International Journal of Adhesion and Adhesives, Vol. 11, pp 25-29, (1991). 

38. A.M. Aboelnaga, M.R. Bayoumi and F.M. Abd-Elkarim “ Experimental Investigation on The Variation of Modal Parameters For Metallic Adherands Using Different Adhesives ”, Proceedings of the 5th Cairo University International Conference on Machine Design and Production, Cairo, Egypt, Vol. 1, pp 594-603 (1991). 

39. M.R. Bayoumi “ Study of Effect of Some Alloying Elements Additions on Fracture Toughness of Low Allov Steels”, Proceedings of University of Alexandria International Conference PEDAC 92, on “Developments in Production Engineering, Design and Control”, Alexandria, Egypt Vol. I, pp 153-164, December 27-29, (1992). 

40. M.R. Bayoumi, “Quantitative Concepts on the Problem of Need and Production Structure Network, Case Study Analysis of Butane/Propane Filling Plants in Egypt”, Proceeding of AL-Azhar Engineering Third International Conference, Vol. 8, pp. 40-50, (1993). 

41. M.R. Bayoumi, “Fatigue Behavior of a Commercial Aluminum Alloy in Sea Water at Different Temperatures ”, Journal of Engineering Fracture Mechanics, Vol. 45, No. 3, pp 297-307, (1993). 

42. M.R. Bayoumi and A.K. Abdellatif, “ Effect of Surface Finish on Fatigue Strength ”, Proceedings of the Fourth International Conference on Production Engineering and, Design for Development, Ain Shams University, Cairo, Egypt Vol. 1, pp. 70-82 , December 27-29, (1993). 

43. M.R. Bayoumi “ Friction and Bending Effects on the Limiting, Drawing Rations of Anisotropic Work-hardening Sheet Metals”, The Proceedings of the 1993 American Society for Mechanical Engineers (ASME) Winter Annual Meeting on, Contact Problems and Surface Interactions in Manufacturing and Tribological Systems, PED-Vol 67/ TRIB4 pp. 285-294, New Orleans, Louisiana, U.S.A., Nov. 28- Dec. 3, (1993). 

44. M. R. Bayoumi and A.K. Abdellatif, “Comparative Study on the Fatigue Behavior of An Aluminum Alloy with and Without Superimposed Contact Frictional Force”. The Proceedings of the 1993 American Society for Mechanical Engineers (ASME) Winter Annual Meeting on, Contact Problems and Surface Interactions in Manufacturing and Tribological Systems, PED- Vol. 67/TRI] 34, pp. 285-294, New Orleans, Louisiana, U.S.A. Nov. 28-Dec. 3, (1993). 

45. F. Abdelgabar, A. A.Aboukhashaba and M.R. Bayoumi “On The Tensile Strength of Metallic Dental Material And Natural Tooth Material Adhesive Butt Joint Under Different Bonding Conditions”, Proceedings of the Fourth International Conference on Production Engineering and Design for Development, Ain Shams University, Cairo, Egypt, Vol. 1, pp. 59-69, (1993). 

46. F. Abdelgabar, M.R. Bavoumi, and A.A. Aboukhashaba, “ Study of the Shear, Strength Between Human Enamel and Dentin Pretreated by Acid Etching And Laser Using a New Dentinal Bonding System”, Proceedings of the Fourth International Conference on Production Engineering and Design for Development, Ain Shams University, Cairo, Egypt, (1993).     

47. M.R. Bayoumi, “Analysis and Characterization of Fatigue Crack Growth During Fatigue Fracture in Mild Steel Weldments”, Bulletin of Faculty of Engineering Assiut University, Assiut, Egypt, Vol. 22, Part 2, pp 95-112, (1994). 

48. M.R. Bayoumi, “Micromechanisms and Topographical Features During Fatigue Fracture of a Central Cracked Plain Carbon Steel Plates Having Different Thickness Ratios”, Journal of Engineering Fracture Mechanics, Vol. 47, No. 5, pp 753-768, (1994).  

49. A.A.N. Aljawi and M.R. Bayoumi “ Vibration Analysis of Adhesively Bonded and Welded Beams. Experimental Investigation”, Proceedings of the First International Conference on Mechanical Engineering Advanced Technology for Industrial Production, Assiut University, Assiut Egypt, Vol. 1, pp. 209-220, December 27-29, (1994). 

50. M.R. Bayoumi “On The Mechanics and Mechanisms of Fracture in Stress Corrosion Cracking of Aluminium Alloys”, Bulletin of the Faculty of Engineering, Assiut University, Assiut, Egypt Vol. 22, Part 1, pp 51-58,(1994). 

51. M.R. Bayoumi, “ Study of the Growth of Fatigue Cracks Propagating Towards the Interfaces of Different Thicknesses in Plain Carbon Steel Plates”, Bulletin of Faculty of Engineering Assiut University, Assiut Egypt, Vol. 22, Part 1, pp 87- 95, (1994). 

52. M.R. Bayoumi, “Study of the Growth of Fatigue Cracks Propagating Towards the Interfaces of Different Thicknesses in Plain Carbon Steel Plates ”, Journal of Engineering Fracture Mechanics, Vol.  , No.  , pp.    -     (199  ). 

53. I.M. Hassab-Allah, M.R. Bayoumi and M.G. El-Sebaie, “ A New Technique for Metallic Ball Forming ”, Proceedings of the First International Conference on Mechanical Engineering Advanced Technology for Industrial Production, Assiut University, Assiut, Egypt, Vol. 1, pp. 227-288, December 27-29, (1994).

54. M.R. Bayoumi, and A.K. Abd El-latif, “ Characterization of Cyclic Plastic Bending of Austenctic AISI 304 Stainless Steel”, Proceedings of the First International Conference on Mechanical Engineering Advanced Technology for International Production Assiut University, Assiut Egypt, Vol. 1, pp. 409-423, December 27-29, (1994). 

55. M.G.El-Sebaie, Y.M. Abd El-Rahim, M.R. Bayoumi, “Reverse Engineering - An over View and An Adaptation Necessity to Enhance Engineering-Technology Education and Its Interaction With Industry ”, The Proceedings of the First Conference on the Mechanical Engineering and the Advanced Technology of the Industrial Production, “Symposium of the Engineering Education and the Industry” December (1994).

 أ. د. محمد جاد السباعى و د. يوسف محمد عبد الرحيم و د. محمد رجب بيومى " الهندسة العكسية : نظرة عامة وحتمية التطبيق لتحسين التعليم الهندسى التكنولوجى وتفاعله مع الصناعة " مطبوعات المؤتمر الدولى الأول فى الهندسة الميكانيكية والتكنولوجيا المتقدمة للإنتاج الصناعى بعنوان : " ندوة التعليم الهندسى والصناعة " ديسمبر 1994 . 

56. M.R.Bayoumi and A.K.Abdelatif, “ Effect of Surface Finish on Fatigue Strength”, Journal of Engineering Fracture Mechanics, Vol.51, No.5, PP. 861-870, (1995). 

57. M.R. Bayoumi, and A.K. AbdelLatif, “Characterization of Cyclic Plastic Bending of AISI 304 Stainless Steel Beams”, Journal of Engineering Fracture Mechanics, Vol., 51, No. 6, pp 1049 - 1058, (1995). 

58. M. R. Bayoumi, “On the Role of Material Selection in Structural Design for Safety Durability and Fracture Control”, Egyptian Society for Mechanical Engineers, Cairo, Egypt, Vol. -, No. 50, pp 18-28, (1995). 

59. M. R. Bayoumi, A. A. Ismail and A. K. Abdellatif, “Towards Understanding the Role of Pitting in Fatigue Behavior of Plane Carbon Steels”, Journal of Engineering Fracture Mechanics, Vol. 52, No. 1, pp 155-177, (1995). 

60. M.R. Bayoumi and A.K. Abdeflatif, “Low Cycle Fatigue Behavior of Notched AISI 304 Stainless Steel Specimens”, Journal of Materials Science, Vol. 30, No. 15, pp 3944-3953, (1995). 

61. M. R. Bayoumi, A. A. Ismail and A.K. Abdellatif, “ Finite Element Analysis of Stresses Due to Pitting of Steel Speciments under Different Cyclic Bending Stresses”, Journal of Engineering Facture Mechanics, Vol., 53. No. 1, pp. 141-115, (1996). 

62. M. R. Bayoumi, “The Mechanics and Mechanisms of Fracture in Stress Corrosion Cracking of Aluminum Alloys”, Journal of Engineering Fracture Mechanics, Vol. 54, No. 6, pp 879-889, (1996). 

63. M.M. Abdelghany and M.R. Bayoumi, “ Towards a Comprehensive Methodology To Solve The General Transport Phemomena Problems”, Proceedings of the III International Congress of Project Engineering, Barcelona and Terrassa, Spain, PP 1395 - 1406, September 12-14, (1996).

64. M.R. Bayoumi, “Quantitative Concepts on the Problem of Needs and Production Structure Network-Case Study: Analysis of Butane/Propane Filling Plants in Egypt”, Proceedings of The III International Congress of Project Engineering, Barcelona and Terrassa, Spain, Vol.2, pp. 659-669, (1996). 

65. M.R. Bayoumi, “Bending and Friction Effects on the Limiting Drawing Ratios of Conventional and Pressure Assisted Deep Drawing Processes for An Isotropic Work Hardening Sheet Metals”, Bulletin of the Faculty of Engineering, Assiut University, Vol.25, No.1, pp. 35-48, January (1997). 

66. M.R. Bayoumi and A.K. Abdellatif , “ Study on the Fatigue Behavior of on Aluminum Alloy With and Without Superimposed Contact Frictional Force”, Bulletin of the Faculty of Engineering Assiut University, Vol. 25, No.1, pp. 49-60, January (1997). 

67. A. A. Nassr, A. A. Khalil and M. R. Bayoumi, “Analysis and Characterization of the Fracture Resistance of Adhesive Bonded Joints”, Bulletin of the Faculty of Engineering, Assiut University, Assiut, Egypt, Vol. 25, No. 2, pp. 161-177,  (1997).  

68. A. A. Tawfik, A.K. Abdel-Rahman, M.R. Bayoumi, M. G. Morsy and S.F. Shweil, “ Bagasse Drying: A Review”, Proceedings of the First International Conference On Sugar and Integrated Industries “Present and Future”, Luxor, Egypt, M.R. Mahmoud, K. M. Hassan and M.R. Bayoumi Editors, Vol. 1, pp 289-312, February 15-18, (1999).  

69. A. Nezam, M.R. Bayoumi and E. K. Mahmoud, “Study of Transportation Cost and Manufacturing Assignment Problems For a System of Different Production Centers, Different Parts and a Specified Single Assembly Line; Case Study: Casting of Centrifugal Pumps Parts in Egypt's Sugar and Integrated Industries Company”, Proceedings of the First International Conference on Sugar and Integrated Industries “Present and Future ”, Luxor, Egypt, M.R. Mahmoud, K.M. Hassan and M.R. Bayoumi Editors, Vol. 1, pp 337-350, February 15-18, (1999). 

70. M.R. Bayoumi, “Experimental Investigation on The Effectiveness of Some Polymer Coatings During Fatigue of Mild Steel in Aggressive Media ”, Proceedings of The Second International Conference on Mechanical Engineering Advanced Technology for Industrial Production, Assiut University, Assiut, Egypt, Vol.1 pp 264-281, March 2-4, (1999). 

71. M.R. Bayoumi, “A Review Article on; Ductile Fracture of High Strength Low Alloy Steels”, Proceedings of The First Spring School of Current Activities on Materials Science, Organized Jointly by Assiut University and Academy of Scientific Research and Technology with Tohoku University (Japan) and held in Assiut University, Assiut, Egypt, pp 1-19, April 24-28, (1999). 

72. M. R. Bayoumi, “A Review Article On; Behavior of Composite Materials Under Cyclic Loading “ Proceedings of The Second International Spring School On Current Activities of Materials Science, Organized jointly by Assiut University and Academy of Scientific Research and Technology with Tohoku University (Japan) and held in Assiut University, Assiut, Egypt, pp 17- 51, April 22-26, (2000). 

73. A.Nezam, M.R.Bayoumi, A.Ezz El-Deen and E.K.Mahmoud, “ Study of the Flow Analysis Techniques to Establish an Efficient Layout of Machines and Workstations for the Manufacturing of Centrifugal Pumps “ , Proceedings of the 7th  International Conference on Production Engineering, Design and Control, Alexandria University, Alexandria, Egypt, Vol. I , pp 391-408, Feb. 13-15, (2001). 

74. A. Nezam, M.R.Bayoumi, A. Ezz El-Deen and E.K.Mahmoud,  “ Study of the Transportation Cost and Manufacturing Assignment Problems for a System of Different Production Centers, Different Parts and a Specified Single Assembly Line; Case Study: Casting, Boring and Turning of Centrifugal Pumps Parts in Egyptian Sugar and Integrated Industries Company “, Proceedings of the 7th International Conference of Production Engineering, Design and Control, Alexandria University, Alexandria, Egypt, Vol. I, pp 485-497, Feb. 13-15, (2001). 

75. A.H.Amer, M.A.E. Saleh, A.I.Rizk, M. R.Bayoumi and A.A.M.Nassr, “ Utilization of Cast Iron Chip in Powder Production” , Proceedings of the 7th International Conference on Production Engineering, Design and Control, Alexandria University , Alexandria, Egypt, Vol. III, pp 1783-1789, (2001). 

76. A.A.Tawfik, Ali K. Abdel-Rahman, M. R. Bayoumi and M.G. Morsy, “ Geometric Properties, Terminal Velocities and Chemical Composition of The Egyptian Sugar Cane Bagasse”, Bulletin of the Faculty of Engineering, Assiut University, Assiut, Egypt, Vol. 29, No. 3, pp. 19-29, September (2001). 

77. M.R. Shalabi and M.R. Bayoumi, “ The Leading Role of Assiut University in the Interaction with the Industrial and Agriculture Development in the South Valley ”, The proceeding of the 3rd Conference on: The Role of the Universities in Community Service and Environment Development in the start of the third Meliniam ”, organized by Cairo University, March (2001).

أ. د. محمد احمد شلبى و أ. د. محمد رجب بيومى " الدور الريادى لجامعة أسيوط فى التفاعل مع التنمية الصناعية والزراعية فى جنوب الوادى " مطبوعات المؤتمر الثالث لجامعة القاهرة بعنوان " الجامعات فى خدمة المجتمع وتنمية البيئة مع بداية الألفية الثالثة " تحت رعاية الأستاذ الدكتور / مفيد شهاب وزير التعليم العالى والدولة للبحث العلمى . مارس 2001 .  

78. A. A. Tawfik, A.K.Abd El-Rahman, M. R. Bayoumi and M. G. Morsy,  “ Bagasse Drying : Advantages and Merits” , Proceedings of the International Conference on : “ Arab Region and Africa in The World Sugar Context”,  Aswan, Egypt, M.R.Mahmoud, P. Baron and M. R. Bayoumi Editors, PP TL 304/1 - TL 3.4/14, March 0-12, (2003). 

79. A. A.  Abbara, A. K. Abd El-Rahman and M. R. Bayoumi, “ New Trends in the Clarification Processes in the Sugar Industry”, Proceedings of the International Conference on: “ Arab Region and Africa in The World Sugar Context “, Aswan, Egypt, M. R. Mahmoud, P. Baron and M. R. Bayoumi Editors , pp TL2.1/1 - TL 2.1/35 , March 9 - 12, (2003). 

80. M. R. Bayoumi, (in Arabic), “ The leading Role of Assiut University in Industrial Development and its Economical and Environmental Returns”, The Proceedings of The Symposium on: “ Assiut University and South Valley Development”, organized Collectively by El-Ahram Establishment and Asssiut University, pp95 - 107, August 6, (2003). 

أ. د. محمد رجب بيومى " الدور الريادي لجامعة أسيوط فى خدمة التنمية الصناعية ومردوداتها الأقتصادية والبيئية " مطبوعات ندوة : جامعة أسيوط وتنمية صعيد مصر ، التى نظمها معهد الأهرام الأقليمى للصحافة بالتعاون مع جامعة أسيوط ، ص 95 إلى 107 ،  6  أغسطس  ( 2003) . 

81. A.A. Abbara, A.K. Abdel-Rahman and M.R. Bayoumi, “ Utilizing of Membrane Filtration in Sugar Industry “ Proceedings of the Thirty Three Annual Conference of The Egyptian Sugar Technologists, pp 1-14, January (2003). 

82. M.R.Bayoumi “Highlights on Some Aspects of Science and Technology on The River Banks During Ancient Egyptian Era”, Proceedings of The International Conference on: “ Assiut University Second International Conference on Great Rivers as Attractors of Local Civilization”, pp 23 -83, October 12 - 14, (2003). 

83. A.A. Tawfik, A.K.Abdel - Rahman and M.R.Bayoumi, “ Pneumatic Bagasse Dryer Advantages and Performance (Experimental Study), Proceedings of The Thirty four Anual Conference of The Egyptian Sugar Technologists, pp 1-12, (2003). 

84. Dr. Mostafa A. Hamed, Ghassan Al-Sadeg and Dr. Mohamed R. Bayoumi, “ Fininte Element Analysis of Fatigue Crack Propagation near the Thickness Interface of High Strength Aluminum Alloy “, Proceeding of IMEC 2004 International Mechanical Engineering Conference, December 5-8 2004, Kuwait. 

85. Abdul Aziz Abbara, Ali K. Abdej-Rahman, Mohamed R. Bayoumi, “ Production of White Sugar Using Membrane Technology”, Proceeding of IMEC 2004 International Mechanical Engineering Conference, December 5-8 2004, Kuwait. 

86. Al-Zafer A. Tawfik, Ali K. Abdej-Rahman, Mohamed R. Bayoumi, “ Performance of Pneumatic Bagasse Dryers “, Proceeding of IMEC 2004 International Mechanical Engineering Conference, December 5-8 2004, Kuwait. 

87. M. R. Bayoumi, A. A. Khalil, A. A. Eisa and W. M. Khairaldien, “ Characterization of Copper-Iron Composites Produced By Powder Metallurgy “ Proceeding of IMEC 2004 International Mechanical Engineering Conference, December 5-8 2004, Kuwait. 

88. M. R. Bayoumi, A. A. Khalil, A. A. Eisa and W. M. Khairaldien, “ Experimental Investigation on the Fracture Toughness of Copper-Iron Composites under Quasi-Static and Dynamic Loading Conditions “ Proceeding of IMEC 2004 International Mechanical Engineering Conference, December 5-8 2004, Kuwait. 

89. Abdul Aziz Abbara, Ali K. Abdel-Rahman, Mohamed R. Bayoumi, “ Microfiltration and Ultrafiltration of Sugarcane Juice in the Production of Plantation”, Third Saudi Technical Conference and Exhibition, Saudi Arabia, Vol 3, December 2004. 

  1. K. I. Ahmed, M. G. El-Sebaie, M. R. Bayoumi and M. S. Gadala, “ Finite Element Modeling of The Blank-Holding Assisted Spinning of Sheet Metals “, Journal of Engineering Sciences, Assiut University, Vol. 32, No. 5, PP. 1993-2011, November 2004.
  1. K. I. Ahmed, M. G. El-Sebaie and  M. R. Bayoumi  “Enhanced Finite Element Modeling And its Experimental Verification of The Bank-Holding Assisted Spinning Of Sheet Metals “ , Journal of Engineering Sciences, Assiut University, Vol. 33, No. 4,Part B, PP. 1381-1407, July 2005.
  1. Ali K. Abdel-Rahman, Abdul Aziz Abbara and Mohamed R. Bayoumi, “Numerical Modelling of Concentration Profilesin Membrane Channel”, Journal of Engineering Sciences, Assiut University, Vol. , No. , Part , PP.  , 2006.
  1. W. M. Khairaldien, A. A. Khalil, M. R. Bayoumi and “Production of Aluminum-Silicon Carbide Composites using Powder Metallurgy at Sintering Temperature above the Aluminum Melting Point” Proceeding of Mechanical Engineering Advanced Technology For Industrial Production fourth Conference, Assiut, Egypt, PP. 438 – 455, December 2006.
  1. A. Mostafa, A. Abouel–Kasem, M. R. Bayoumi and M. G. El-Sebaie “Rubber-Filler Interactions and its Effect in Rheological and Mechanical Properties of Filled Compounds” Proceeding of Mechanical Engineering Advanced Technology For Industrial Production fourth Conference, Assiut. Egypt, PP. 359 – 374, December 2006.
  1. Ali K. Abdel-Rahman, A. A. Abbara and M. R. Bayoumi “Membrane Filtration  in Sugar Industry – Membrane Fouling” Proceeding of World Perspectives for Sugar Beet and Cane as a Food and Energy Crop Conference, Sharm el Sheik, Egypt, P. 11/1 – 11/22  March 2007.
  1. M. R. Bayoumi, Mohamed Abuel-Kasem, Mohamed M. Abd Elkader and Essam Elnagreedy “Air Pollution Control from Sugar Beet Factories” Proceeding of World Perspectives for Sugar Beet and Cane as a Food and Energy Crop Conference, Sharm el Sheik, Egypt, P. 8/1 – 8/6  March 2007.

  1. W. M. Khairaldien, A. A. Khalil and M. R. Bayoumi “Mechanical Properties Characterization of Aluminum – Silicon Carbide Composites Produced Using Powder Metallurgy at Sintering Temperatures above the Aluminum Melting Point” Proceeding of the 10th International Mining, Petroleum and Metallurgical Engineering conference, Assiut. Egypt, PP. 161 – 178 March 2007.

98.  W. M. Khairaldien, A. A. Khalil, and M. R. Bayoumi “The Dynamic Fracture Behavior Of An Aluminum – Silicon Carbide Composites  Produced Using Powder Metallurgy Method ” Proceedings of the 6th Jordanian International Mechanical Engineering Conference (JIMEC’6), Amman – Jordan, 22 - 24 October 2007.

  99.  W. M. Khairaldien, A. A. Khalil, and M. R. Bayoumi “Production of Aluminum-Silicon Carbide Composites Using Powder Metallurgy at Sintering” Journal of Testing and Evaluation, Vol. 35, No. No. 6, PP. 655 – 667, November 2007.

1.   M. R. Bayoumi, and M.M.Abd Elghany, “Leakage and Cracks Detection Using Acoustic Emission Technique”. 

2.   M.R. Bayoumi, and M. M. Abd Elghany, “ Correlation Between Material Properties and Surface Pitting Due to a Simulated Liquid-Solid Flow”.  

3.   M.R. Bayoumi, “ Towards a Universal Approach for Productivity Index in Industrial Firms”. 

4.   M.R. Bayoumi, “Microscopic and Macroscopic Aspects in Fracture of Aluninum Alloy Weldments”. 

5.   M.R. Bayoumi, “ Microscopic and Macroscopic Aspects in Fracture of Steel Weldments ”.  

6.   Y. A. Elhainy, A.A. Khalil and M.R. Bayoumi, “Wear Characteristics of Tillage Tool Materials Under Different Soil Conditions ”. 

7.   O.A.I. Elganainy and M.R. Bayoumi, “Plastic strain Limits for Anisotropic Work~Hardening Material in Combined Drawing and Stretch Forming”. 

8.   K.G. Mahmoud and M.R. Bayoumi, “Computer Aided Design for Gear Pumps”. 

9.   M.R. Bayoumi, A.A. Naser and S.M. Morsy, “Dependence of Corrosion Behavior of Plane Carbon Steel Weldments on Surface Roughness Under Different Temperature and Na CL- Concentration. 

10. M.R. Bayoumi, A.A. Naser and M. Ghonem, “Characterization of Dynamic Fracture Toughness of Heat Treated Steel In The Tansition Temperature Region Using Instrumented Sharpy Test”. 

11. M. R. Bayoumi, and S.M.H. Darwish, “Experimental Investigation of Some Alternative Steel Construction Design For Cathode Cooling Box of Aluminium Reduction Cell”. 

12. M.R. Bayoumi, and S.M.H. Darwish, “Prediction of the Actual Constructional Parameters of Cathode Cooling Box of Aluminium Reduction Cell From Small Scale Laboratory Tests”.  

13. M.R. Bayoumi, and S.M.H. Darwish, “Response of a Developed Cathode Cooling Box of Aluminium Reduction Cell during an Industrial Working Environment”. 

14. M.R. Bayoumi, “ Effect of Surface Roughness on Fracture Toughness of Bonded Joints”. 

15. M.R. Bayoumi, “On the Fracture of Bones”. 

16. M.R. Bayoumi, “Effect of Mechanical Properties on Sub-Surface work-Hardening During Machining of Plain Carbon Steel”.  

17. M.R. Bayoumi, and A. M. Aboelnaga, “Adhesive Thickness Effect on the Variations of Modal Parameters of Bonded Joints”. 

18. M.R. Bayoumi, “Corrosion Fatigue of coated Metallic Materials”. 

19. M.R. Bayoumi, “Cyclic Plastic Bending of Metallic Pipes”. 

20. M.R. Bayoumi, “Fatigue Behavior of Hollow Specimens under Different Machining Conditions and Aggressive Environments”. 

21. M.R. Bayoumi, “Fatigue and Residual Stresses in Weldments”. 

22. M.R. Bayoumi, “Fracture Toughness of Brittle Materials Using Double Torsion Test Technique”. 

23. M.R. Bayoumi, “Mechanical Behavior of Copmosite Materials”. 

24. M. R. Bayoumi, A. A. Ismail and A. K. Abdellatif, “Experimental Investigation on the Effectiveness of Some Polymer Coatings During Fatigue of Mild Steel in Aggressive Media”, Submitted to Journal of Engineering Fracture Mechanics. 

25. M. R. Bayoumi and M. N. Bassim, “Geometrical Dependence of the Relationship between Microstructutal Mechanisms and Fracture Toughness of Plain Carbon Steel at Different Strain Rates ”, to be submitted for Publication. 

26. M. R. Bayoumi, “Local Strain Effect on Dislocation Structure Development In Monotonic Fracture of Pre-Cold Rolled Pressure Vessel Steel”, to be submitted for Publication.    

27. A.A.Abbara, S.F.Shweil, M.R.Bayoumi and K.M.Hassan, “An Investigation on The Use of Double Stage Froth Flotation For Clarification of Mixed Juice, Part I: Fundamentals for The Production of Raw Sugar”, to be submitted for Publication. 

28. A.A.Abbara, S.F.Shweil, M.R.Bayoumi and K.M.Hassan “An Investigation on The Use of Double Stage Forth Flotation for Clarification of Mixed Juice, Part II: Techniques To improve The Quality of The Final Clear Juice” to be Submitted for Publication.

1.   M. R. Bayoumi, M. Sc. Thesis entitled,  “Deep-Drawing of Sheet Metals Into a High Pressure Medium, Assiut University, Assiut, Egypt, (1978). 

2.   M. R. Bayoumi, Ph.D. Thesis entitled, “Study of The Relation Between Fracture Toughness and Ductility”, University of Manitoba, Winnipeg Manitoba, Canada, (1984). 

3.   A. A. Ismail, M. Sc. Thesis entitled, “Study of The Corrosion fatigue Resistance For Coated Carbon Steel”, M. R. Bayoumi and A.K. Abd-Elatif (Supervisors), King Abd-Elaziz University, Jeddah, Saudi Arabia, (1993) 

4.   A. El-Sadeq, M. Sc. Thesis entitled, “Study of The Fatigue Crack Growth at The Thickness Interfaces of High Strength Aluminum Alloys”, M.R. Bayoumi and M. A. Hamed (Supervisors), King Abd-Elaziz University, Jeddah, Saudi Arabia, (1993). 

5.   W. M. Khair El-Deen, M.Sc. Thesis entitled, “Study of The Variation of Fracture Toughness of Particulate-Strengthed Composites Under Different Loading Rates”, M. R. Bayoumi, A. A. Khalil and M.A. Eisa (Supervisors), Assiut University, Assiut, Egypt, (2000). 

6.   A. A. Abara , M. Sc.  Thesis entitled, “Clarification of Raw Cane and Beet Juice Using Double Stage Forth Method” K.M. Hassan, M. R. Bayoumi and S.F. Shweil (Supervisors), Assiut University, Assiut, Egypt, (2001).  

7.   A. Nezam, M. Sc. Thesis entitled, “Quantitative Concepts on The Problem of Needs and Production Structure Network for Planning and Manufacturing of Centrifugal Pumps in Sugar and Integrated Industries Company”, M. R. Bayoumi, A. Khalil and A.E. Abd-Ebrahim (Supervisors), Assiut University, Assiut, Egypt, (2003). 

8.   A. A. Tawfik, M. Sc. Thesis entitled, “ Bagass Drying”, M. G. Morsy, M. R. Bayoumi and A.K. Abdel-Rahman (Supervisors), Assiut University, Assiut, Egypt, (2003). 

9.   A. El-Qusy, M. Sc. Thesis entitled, “Study of Spring Back Effects During Bending of Sheet Metals”, A.G.El Sebaie, M.R. Bayoumi and M. A. Eisa (Supervisors), Assiut University, Assiut, Egypt, (In progress). 

10. K. Ibrahim, Ph.D. Thesis entitled, “Accurate Cups By Blank Holding Assisted Spinning With Simultaneously Shear Forming”, M.G. El-Sebaie and M. R. Bayoumi (Supervisors), Assiut University, Assiut, Egypt, (2005).  

11. K. A. Khalil, Ph.D. Thesis entitled, “ Fatigue Fracture of Composite Materials”, M. R. Bayoumi and A. A. Khalil (Supervisors), Assiut University, Assiut, Egypt (In progress). 

12. A. Abdel -Aziz Mohamed, M. Sc. Thesis entitled, “ Heat Treatment for cane cutter knifes. And Gears”, M. R. Bayoumi, A.A. Mohamed and M. I. Fahmy (Supervisors), Assiut University, Assiut, Egypt, (2004). 

13. A. Amer, M.Sc. Thesis entitled, “The Compaction behavior of Cast Iron Powder ”, M.R. Bayoumi, A.A. Naser, M. A. Eisa (Supervisors), Assiut University, Assiut, Egypt, (In progress). 

14. H. A. Mohamed, M. Sc. Thesis entitled, “ Study of The Manufacturing Processes for Conveyors Chains”, M. R. Bayoumi, A. Ezz El-Deen and A. A. Elfoly  (Supervisors), Assiut University, Assiut, Egypt, (In progress).  

15. R.A. Abdel-Rahim, M.Sc. Thesis entitled, “ Study of The Performance of Rolling Bearings Under Severe Working Conditions “, M. R. Bayoumi, K. M. Emara (Supervisors), Assiut University, Assiut, Egypt, (In progress). 

16. W. M. Khair El-Deen, Ph.D. Thesis entitled, “ Study of The Fracture Toughness of Aluminum, Matrix Composites Under Different Loading Rates”, M. R. Bayoumi and A. A. Khalil (Supervisors), Assiut University, Assiut, Egypt, (In progress). 

17. A. Mostafa, M. Sc. Thesis entitled, “Theoretical and Experimental Estimation of life time and Shape Optimization for bad Rubber” M. R. Bayoumi and M.G. El-Sebaie, A. Abo El-Qasem (Supervisors), Assiut University, Assiut, Egypt, (In progress).  

18. E. A. Elnagridy, M. Sc. Thesis entitled, “ The Control of Air Pollution in Sugar Beet Factories”, M.  R. Bayoumi, M. A. Mohamed and M. M. Abdelquader (Supervisors), Assiut University, Assiut, Egypt(In Progress). 

19. A. A. Abbara, Ph. D. Thesis entitled, “Study of Using Membrane Filtration in Clarification of Sugar Juices”, M. R. Bayoumi, A. K. Abdel Rahman and M. Gad Elrab (Supervisors), Assiut University, Assiut, Egypt (2005 

Courses Taught

a)    At Postgraduate level

·    Failures of Engineering Materials and Mechanical Structure

·    Systems Analysis

·    Fault Diagnosis in Mechanical Systems

·    Tribology

·    Metal Forming in Theory and Practice

·    Machine Tool Design

·    Advanced Topics in Machine Design

·    Advanced Mechanical Engineering Lab

·    Industrial Maintenance

·    Mechanical Behavior of Engineering Materials

 b)    At Undergraduate Level

·    Production Engineering

·    Engineering Drawing