عودة

 

الأستاذ الدكتور/ محسن عبد النعيم حسن محمد
أستاذ بقسم الهندسة الميكانيكية، كلية الهندسة، جامعة أسيوط
تفاصيل السيرة الذاتية
بيانات ال MIS دخول الإعضاء تواصل مع العضو نسخة للطباعة
تليفون المكتب 20882411159
الموبايل 201024904983
البريد الالكترونى mohsen.mohamed@eng.au.edu.eg
el_khozami@rocketmail.com
google scholar link https://scholar.google.com/citations?user=Zyn0qjoAAAAJ&hl=en
  • دكتوراه، 2002
  • ماجستير، 1998
  • بكالوريوس، 1991
الدرجات العلمية :
  • أستاذ بقسم الهندسة الميكانيكية، كلية الهندسة، جامعة أسيوط، 2014
  • أستاذ مساعد بقسم الهندسة الميكانيكية، كلية الهندسة، جامعة اسيوط، 2008
  • مدرس بقسم الهندسة الميكانيكية، كلية الهندسة، جامعة اسيوط، 2002
  • مدرس مساعد بقسم الهندسة الميكانيكية، كلية الهندسة، جامعة اسيوط، 1998
  • معيد بقسم الهندسة الميكانيكية، كلية الهندسة، جامعة اسيوط، 1993

المجالات البحثية:
Forming Technology , Die Design , laser cutting , manufactring process control , Modelling and simulation of manufacturing processes

الابحاث :

1-Nyanor, P.; Hamada, A.S.; Hassan, M.A. , Ballistic impact simulation of proposed bullet proof vest made of TWIP steel, water and polymer sandwich composite using Fe-SPH coupled technique , Key Engineering Materials , v 786, p 302-313, 2018
2-D Abidou, N Yusoff, N Nazri, MAO Awang, MA Hassan, AAD Sarhan , Numerical simulation of metal removal in laser drilling using radial point interpolation method , Engineering Analysis with Boundary Elements , Vol 77, pp 89-96, April, 2017
3-Ahmed Abdel-Aleem, Mahmoud A. El-Sharief, Mohsen A. Hassan and Mohamed G. El-Sebaie, Optimization of reliability based model for production inventory system, International Journal of Management Science and Engineering Management, Taylor & Francis, 12, 1-11, http://www.tandfonline.com/doi/abs/10.1080/17509653.2017.1292156, April, 2017
4-Ahmed Abdel-Aleem, Mahmoud A. El-Sharief, Mohsen A. Hassan, Mohamed G. El-Sebaie, A surface response optimization model for EPQ system with imperfect production process under rework and shortage, OPSEARCH , Springer India, 54, http://link.springer.com/article/10.1007/s12597-017-0301-1, February, 2017
البحث كاملا
5-Abdelsalam, Amir A.; Araby, Sherif; Hassan, M.A.; El-Moneim, A.A. , Constitutive modelling of elastomer/graphene platelet nanocomposites , IOP Conference Series: Materials Science and Engineering , v 244, n 1, October, 2017
6-Ahmed Abdel-Aleem, Mahmoud A. El-Sharief, Mohsen A. Hassan and Mohamed G. El-Sebaie, Implementation of Fuzzy and Adaptive Neuro-Fuzzy Inference Systems in Optimization of Production Inventory Problem, Applied Mathematics & Information Sciences, Naturlapublication, Vol. 11, No. 1, pp.1-10, January, 2017
7-Ahmed Abdel-Aleem, Mahmoud A. El-Sharief, Mohsen A. Hassan and Mohamed G. El-Sebaie, Implementation of Fuzzy and Adaptive Neuro-Fuzzy Inference Systems in Optimization of Production Inventory Problem, Applied Mathematics & Information Sciences , Natural Sciences Publishing, vol. 11, no. 1, pp. 289–298, http://www.naturalspublishing.com/Article.asp?ArtcID=12616, January, 2017
البحث كاملا
8-D Abidou, N Yusoff, N Nazri, MAO Awang, MA Hassan, AAD Sarhan , Numerical simulation of metal removal in laser drilling using symmetric smoothed particle hydrodynamics , Precision Engineering, http://dx.doi.org/10.1016/j.precisioneng.2017.01.012, 2017
9-S Peirovi, M Pourasghar, AF Nejad, MA Hassan, A study on the different finite element approaches for laser cutting of aluminum alloy sheet , The International Journal of Advanced Manufacturing Technology, Springer, DOI: 10.1007/s00170-017-0599-0, 2017
10-HY Moayad, M.A Hassan, B Mardi, N Azizi, A PC‐based simulation platform for a quadcopter system with self‐tuning fuzzy PID controllers , Computer Applications in Engineering Education, Vol 24, No.6, pp. 934-950, June, 2016
11-S Naderi, A Dabbagh, MA Hassan, BA Razak, Modeling of porosity in hydroxyapatite for finite element simulation of nanoindentation test, Ceramics International, Elsevier, Volume 42, Issue 6, Pp. 7543–7550, May, 2016
12-Nik Masmiatia Ahmed A.D. Sarhanb, Mohsen Abdel Naeim Hassanb, Mohd Hamdib, Optimization of cutting conditions for minimum residual stress, cutting force and surface roughness in end milling of S50C medium carbon steel, Measurement , Volume 86 , Pages 253–265, May, 2016
13-Masmiati, Nik; Sarhan, Ahmed A.D.; Hassan, Mohsen Abdel Naeim; Hamdi, Mohd , Optimization of cutting conditions for minimum residual stress, cutting force and surface roughness in end milling of S50C medium carbon steel , Measurement: Journal of the International Measurement Confederation , v 86, p 253-265, May, 2016
14-Naderi, Sadjad; Dabbagh, Ali; Hassan, Mohsen Abdelnaeim; Razak, Bushroa Abdul; Abdullah, Hadijah; Abu Kasim, Noor Hayaty , Modeling of porosity in hydroxyapatite for finite element simulation of nanoindentation test , Ceramics International , v 42, n 6, p 7543-7550, May, 2016
15-Hossain, Anamul; Hossain, Altab; Nukman, Y.; Hassan, M.A.; Harizam, M.Z.; Sifullah, A.M.; Parandoush, P. , A Fuzzy Logic-Based Prediction Model for Kerf Width in Laser Beam Machining , Materials and Manufacturing Processes , v 31, n 5, p 679-684, April, 2016
16-DM Jafarlou, E Zalnezhad, MA Hassan, MA Ezazi, NA Mardi , Severe plastic deformation of tubular AA 6061 via equal channel angular pressing , Materials & Design , Elsevier, Vol 90 - No 15, , Pages 1124–1135, January, 2016
17- A. M. Sifullah, Y. Nukman, M. A. Hassan and A. Hossain , Finite element analysis of fusion laser cutting on stainless steel-304, ARPN Journal of Engineering and Applied Sciences, , VOL. 11, NO. 1, pp.181-189. , 2016
18-MA Hassan, AR Bushroa, Reza Mahmoodian, Identification of Critical Load for Scratch Adhesion Strength of Nitride-Based Thin Films Using Wavelet Analysis and a Proposed Analytical Model, Surface and Coatings Technology , Elsevier, Volume 277, No.15 , pp.216–221, September, 2015
19-Hassan, M.A.; Bushroa, A.R.; Mahmoodian, Reza , Identification of critical load for scratch adhesion strength of nitride-based thin films using wavelet analysis and a proposed analytical model , Surface and Coatings Technology , v 277, p 216-221, September, 2015
20-DM Jafarlou, E Zalnezhad, MA Ezazi, NA Mardi, MA Hassan, The application of equal channel angular pressing to join dissimilar metals, aluminum alloy and steel, using an Ag-Cu-Sn interlayer, Materials & Design, August, 2015
21-MA Hassan, IM Hassab-Allah, LMA Hezam, NA Mardi, M Hamdi, Deep Drawing of Asymmetric Cups through Conical Die without Blank Holder, Proceedings of the World Congress on Engineering Proceedings of the World Congress on Engineering 2015 Vol II WCE 2015, July 1 - 3, 2015, London, U.K. , ISBN: 978-988-14047-0-1 ISSN: 2078-0958 (Print); ISSN: , June, 2015
22-Walid Mahmoud Shewakh, MA Hassan, Ibrahim M Hassab-Allah, Square-Cup Deep Drawing of Relatively Thick Sheet Metals through a Conical Die without Blankholder, International Journal of Materials Forming and Machining Processes (IJMFMP) , GI Global, Vol 2 No 2, pp 31-46, June, 2015
23-WM Shewakh, MA Hassan, IM Hassab-Allah , Square-Cup Deep Drawing of Relatively Thick Sheet Metals through a Conical Die without Blankholder , International Journal of Materials Forming and Machining Processes (IJMFMP), IGI Global, June, 2015
24-M. A. Hassan, Mohammed Elfiky , Y.Nukman1, Reza Mahmoodian, Monte Carlo Simulation Model for Magnetron Sputtering Deposition, Advanced Materials Research , Vol 1105, pp 69-73, June, 2015
25-Reza Mahmoodian; M. Hamdi; M.A Hassan; A. Akbari, Mechanical and Chemical characterization of a TiC/C system synthesized using a focus plasma arc , PLoS One , Public Library of Science, Vol 10 N0.6 , pp e0130836, June, 2015
26-Win, Moe; Bushroa, A.R.; Hassan, M.A.; Hilman, N.M.; Ide-Ektessabi, Ari , A contrast adjustment thresholding method for surface defect detection based on mesoscopy , IEEE Transactions on Industrial Informatics , v 11, n 3, p 642-649, June, 2015
27-Moe Win, A. R. Bushroa, M. A. Hassan, N. M. Hilman,, Ari Ide-Ektessabi, A Contrast Adjustment Thresholding Method for Surface Defect Detection based on Mesoscopy , IEEE Transactions on Industrial Informatics, IEEE Transactions, Vol 11- No 3, pp 642-649, May, 2015
28-FADI ALBATSH, Saad Mekhilef, Shameem Ahmad, Hazlie Mokhlis and M. A. Hassan, Optimal Placement of Unified Power Flow Controllers to Improve Dynamic Voltage Stability Using Power System Variable Based Voltage Stability Indices , Plos One , Vol 10 No 4. , May, 2015
29-Davoud Mashhadi Jafarlou, Erfan Zalnezhad, Abdelmagid Salem Hamouda, Ghader Faraji, Noor Azizi Bin Mardi, Mohsen Abdelnaeim Hassan Mohamed, Evaluation of the Mechanical Properties of AA 6063 Processed by Severe Plastic Deformation, Metallurgical and Materials Transactions A , Springer, Vol 46 No.6 , PP 2790-2798, April, 2015
30-A M Sifullah, Y Nukman, and M A Hassan , 3D FEM Simulation to Predict the Heat Affected Zone during Laser Machining on Stainless Steel 304 , International Conference on Mechatronics and Production Processes (ICMPP’2015), Pattaya (Thailand), Vol 1, Pp. 43-46, April, 2015
31-Raza Moshwana, Farazila Yusof, M. A. Hassan, S. M. Rahmat, Dissimilar friction stir welding between polycarbonate and AA 7075 alloy International Journal of Materials Research, International Journal of Materials Research , Volume: 106 No: 3 , pp. 258-266 , March, 2015
32-FADI ALBATSH, Saad Mekhilef, Shameem Ahmad, Hazlie Mokhlis and M. A. Hassan, Enhancing power transfer capability through flexible AC transmission system devices: A review, Frontiers of Information Technology & Electronic Engineering , Zhejiang University Press & Springer, 16 . Vol, 658-678 pp, March, 2015
33-Reza Mahmoodian, M. Hamdi, M.A Hassan, Ti-Based Ceramic Composite Processing using Hybrid Centrifugal Thermite Assisted Technique, 39th Int'l Conf & Expo on Advanced Ceramics & Composites (ICACC 2015), John Wiley & Sons, March, 2015
34-F. M. Albatsh, S. Ahmad, S. Mekhilef, H. Mokhlis and M. A. Hassan, Power Quality Improvement in Transmission Network using Fuzzy Logic based Unified Power Flow Controller, in the proceedings of IEEE International conference on Industrial Technology (ICIT), Seville, Spain, March 2015. , March, 2015
35-Raza Moshwan, Farazila Yusof M. A. Hassan, S. M. Rahmat, Effect of tool rotational speed on force generation, microstructure and mechanical properties of friction stir welded Al-Mg-Cr-Mn (AA 5052-O) alloy, Materials & Design , Elsevier, Vol 66 - No 5, pp. 118-128, February, 2015
36-Anamul Hossain, Altab Hossain , Y. Nukman, M. A. Hassan, M. Z. Harizam, A. M. Sifullah, P. Parandoush, A fuzzy logic based prediction model for kerf width in laser beam machining , Materials and Manufacturing Processes , Taylor & Francis, DOI:10.1080/10426914.2015.1037901, February, 2015
37-Naderi, S.; Hassan, M.A.; Bushroa, A.R. , Alternative methods to determine the elastoplastic properties of sintered hydroxyapatite from nanoindentation testing , Materials and Design , v 67, p 360-368, February, 2015
38-NM NikPa, AAD Sarhan, MA Hassan, MHA Shukor , Novel uses of SiO2 nanolubrication in end milling of medium carbon steel for higher compressive residual stress measured by high-energy X-ray diffraction data , Journal of Engineering Tribology, Part J, SAGE Publications, October, 2015
39-M. A. Hassan Amir Radzi Ab, Zahari Taha M.A.Hamdi, Mechanics of Energy Absorption by Progressive Plastic Deformation of a Square Column with an Ellipsoidal Bulge Base, Applied Mathematics & Information Sciences , Vol 9- No 11, pp 1-8, January, 2015
40-A.I.M.Hassaballah, M. A. Hassan, N.A.Mardi and M.A.Hamdi, Modeling the effects of myocardiac fiber architecture and material properties on the left ventricle mechanics during rapid filling phase, Applied Mathematics & Information Sciences , Vol 9 - No1, pp. 161-167, January, 2015
41-R Mahmoodian, M Hamdi, MA Hassan , Ti-Based Ceramic Composite Processing using Hybrid Centrifugal Thermite Assisted Technique , 39th Int'l Conf & Expo on Advanced Ceramics & Composites (ICACC 2015), John Wiley & Sons, January, 2015
42-A. Fadi, M. Saad, Hazli, M. A. Hassan,, Dynamic Power Flow Control in Transmission Lines using Fuzzy Logic Based Unified Power Flow Controller, Applied Mathematics & information Sciences , (accepted), 2015
43-R Mahmoodian, R Yahya, A Dabbagh, M Hamdi, MA Hassan , Investigation of embedded Si/C system exposed to a hybrid reaction of centrifugal-assisted thermite method , PLoS One, PUBLIC LIBRARY SCIENCE, 2015
44-Moshwan, Raza(1); Rahmat, Sahifulddin M.(1); Yusof, Farazila(1); Hassan, Mohsen A.(1,2,3); Hamdi, Mohd(1); Fadzil, Mohd(1) , Dissimilar friction stir welding between polycarbonate and AA 7075 aluminum alloy , International Journal of Materials Research , v 106, n 3, p 258-266, 2015
45-Nikpa, Nik Masmiati; Sarhan, Ahmed Aly Diaa; Abdelnaeim Hassan, Mohsen; Hamdi Abd Shukor, Mohd , Novel uses of SiO2nanolubrication in end milling of medium carbon steel for higher compressive residual stress measured by high-energy X-ray diffraction data , Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology , v 230, n 6, p 697-708, 2015
46-Masmiati, Ahmed Sarhan, M. A. Hassan, M. Hamdi and H. S. Chan, Investigate the Possibility to Reduce the Residual Stress Level in 2.5D Cutting Using Titanium Coated Carbide Ball Endmill, Advances in Materials Science and Engineering , 2014 Vol, doi.org/10.1155/2014/485267, August, 2014
47-R. Mahmoudian, M.A. Hassan, M. Hamdy, Study of Ti+C combustion synthesis reaction in a controlled declining temperature state, Combustion Science and Technology , Taylor & Francis, Vol 186 No. 6, pp 737-746, June, 2014
البحث كاملا
48-Sadjaad, M.A. Hassan, Bushrao, Alternative Methods to Determine the Elastoplastic Properties of Sintered Hydroxyapatite from Nanoindentation Testing, Materials & Design , Elsevier, Vol 67 , PP 360-368, May, 2014
49-Fadi Albatish, Saad Mekhelif, Hazlie Mokhlis, Mohsen Hassan, D-Q model of Fuzzy based UPFC to control power flow in transmission network , Proceedings of the 7th IET international conference on Power Electronics, Machines and Drives, PEMD-2014, Manchester, UK. , IET Digital Library, DOI: 10.1049/cp.2014.0397, pp 5.3. 01-5.3. 01 , April, 2014
البحث كاملا
50-Belal Ahmed, M. A. Hassan, Saad Mekhelif, Fuzzy Swinging-up with Sliding Mode Control for Third Order Cart-Inverted Pendulum System, International Journal of Control, Automation and Systems, Vol 13 - No1, DOI: 10.1007/s12555-014-0033-4, February, 2014
51-M. A. Hassan, L. M. Hezam, M. G. Elsbaie, J. Purbolaksono, Deep drawing characteristics of square cups through conical dies , Procedia Engineering , Elsevier, Vol 81, pp 873-880, December, 2014
52-J. Davoud, M. A. Hassan, N.M. Mardi, E. Nezhad , Influence of temper rolling on tensile property of low carbon steel sheets by application of Hill 48 anisotropic yield criterion, Procedia Engineering , Elsevier, Vol 81, pp 1222-1227, December, 2014
53-Devi CHANDRA, Judha PURBOLAKSONO, Yusoff NUKMAN, Haw-ling LIEW, Singh RAMESH, Mohsen-abdel HASSAN, Fatigue growth of a surface crack in a V-shaped notched round bar under cyclic tension, Journal of Zhejiang University SCIENCE A , Zhejiang University Press, Vol 15 No. 11, pp 873-882, November, 2014
البحث كاملا
54-N. Sadjad, M. A. Hassan, A. R. Bushrao, An Empirical Modified Fatigue Damage Model for Impacted GFRP Laminates, Acta Astronautica , Elsevier, Vol 103, pp. 119-128, November, 2014
البحث كاملا
55-Materials & Design, Low-velocity impact damage of woven fabric composites: Finite element simulation and experimental verification, Materials & Design , Elsevier, Vol 53, pp 706-718, January, 2014
56-M. A. Hassan, R. Mahmodian, M. Hamdi, Modified smoothed particle hydrodynamics (MSPH) for the analysis of centrifugally assisted TiC-Fe-Al2O3 combustion synthesis, Scientific Reports , Nature.com, Vol 4 Article number:3724, DOI: 10.1038/03724, 2014
57-A. I. M. Hassaballah, M. A. Hassan, N.A.Mardi and M.A.Hamdi, An Inverse Finite Element Method for Determining the Tissue Compressibility of Human Left Ventricle Wall during the Cardiac Cycle, PLOS ONE 8(12): e82703. doi:10.1371/journal.pone.0082703 , Vol 8 - No12, e82703. doi:10.1371/journal.pone.0082703, 2014
58-R. mahmoudian, M. A. Hassan, M. Hamdi, Ali Dabagh, In-situ TiC-Fe-Al2O3-TiAl/Ti3Al composite coating processing using centrifugal assisted combustion synthesis , Composites Part B , Vol. 59 , pp. 279-284., 2014
59-Ramesh, A. Yaghoubi, K.Y. Sara Lee, K.M. Christopher Chin, J. Purbolaksono, M. Hamdi, M.A. Hassan, Nanocrystalline forsterite for biomedical applications: Synthesis, microstructure and mechanical properties, Original Research Article, Journal of the Mechanical Behavior of Biomedical Materials, Vol.25, PP.63-69, September, 2013
60-C.J. Tana, W.T. Chonga, M.A. Hassan, End Formation of a Round Tube into a Square Section having Small Corner Radii, Journal of Materials Processing Technology, vol.213, Issue 9, PP.1465:1474, September, 2013
61-Reza Mahmoodian, M.A. Hassan, R.G. Rahbari, R. Yahya, M. Hamdi, A novel fabrication method for TiC Al2O3 Fe functional material under centrifugal acceleration, Composites Part B: Engineering, Vol.50, PP.187-192, June, 2013
62-Amir R. A. Ghani and M. A. Hassan , AXIAL CRUSH BEHAVIOUR OF SQUARE COLUMN WITH EXTERNAL TAPERED PLUNGER, Journal of Engineering Sciences, Assiut University, Faculty of Engineering, 41- 4, June, 2013
63-M Amiriyan, S Ramesh, R Tolouei, WJ Kelvin Chew, J Purbolaksono, MA Hassan, M Hamdi, WD Teng, Densification behavior of Y-TZP containing zirconium diboride composites, Journal of Ceramic Processing Research , Vol 13 No 3, pp 288-291, June, 2013
64-Mirhassani S. M., Ahmadian J., Ghorbanian M. J., Hassan M. A., Stability of geostationary flying satellite under combined sliding mode and PID control , Conference Proceeding:2013 IEEE Business Engineering and Industrial Applications Colloquium, BEIAC 2013, Langkawi; Malaysia; 01/2013 , IEEE, pp 115-119, April, 2013
65-KY Sara Lee, KM Christopher Chin, S Ramesh, J Purbolaksonoa, MA Hassan, M Hamdi, WD Teng, Characterization of forsterite ceramics, Journal of Ceramic Processing Research , Vol 14 No 1, pp 131-133, February, 2013
66-Nik, M. N., Ahmed A. D., Hamdi M., Hassan M. A, Investigate the Lubrication Effects on Cutting Force and Power Consumption in Up and Down End Milling, Advanced Materials Research , Vol 748, pp 264-268, October, 2013
البحث كاملا
67-M. A. Hassan, C. J. Tan, K. Yamaguchi , A developed friction test for sheet metal stretch forming processes, International Journal of Surface Science and Engineering , Inderscience Publishers Ltd, Vol 7 No. 2, pp 152-170, January, 2013
68-Belal Ahmed, M. A. Hassan, Saad Mekhlif , Decoupled Third-order Fuzzy Sliding Model Control For Cart- Inverted Pendulum System; , Journal of Applied Mathematics & Information Sciences, Natural Sciences publishing , Vol 7 No.1 , pp 193- 201, 2013
69-A. Sadollah, M. A. Hassan, A. Bahreininejad , Optimum culture conditions for 1,3-Propanediol production from Crude Glycerol using metaheuristic algorithms, , Journal of Applied Mathematics and Information science letters, Natural Sciences Publishing, Vol 1, pp 1-8, 2013
70-S. Ramesh, K.L. Aw, R. Tolouei, M. Amiriyan, C.Y.Tan, M. Hamdi, J. Puyrbolaksono, M. A. Hassan, W.D. Teng, Sintering properties of hydroxyapatite powders prepared using different methods, , Ceramics International, Eslevier, Vol 39, pp 111-119, 2013
71-Nukman Y, Hassan M. A. and Harizam M .Z, Optimization of Prediction Error in CO2 Laser Cutting process by Taguchi Artificial Neural Network Hybrid with Genetic algorithm, Applied Mathematics & Information Sciences , Natural Sciences publishing , Vol 7 No.1 , pp 363-370, 2013
72-M. A. Hassan, C. J. Tan, K. Yamaguchi, A Developed Friction Test for Sheet Metal Forming, International Journal of Surface Science and Engineering, Vol.7,No.2, PP.152-170, 2013
73-Mahmoodian R, Rahbari RG, Hamdi M, Hassan MA & Sparham M., The Effects of An Unexpected Ceramic Coating Phase at the Head of a Pipe on Joining and Postprocessing of a Ceramic-Lined Composite Pipe., Journal of the Minerals, Metals and Materials Society, Vol.66,No.1, PP.80-85, 2013
74-S. Ramesh, W.J. Kelvin Chew, C.Y. Tan, J. Purbolaksono, A. M. Noor, M. A. Hassan, U. Sutharsini, M. Satgunam & W.D. Teng, Influence of Manganese on the Sintering Properties of Tetragonal Zirconia, Ceramics Silikaty, Vol.57, No.1, PP.28-32 , 2013
75-Hamza Belkame, Saad Mekhilef, Ammar Masaoud, Mohsen Abdel Naeim, Novel Three-phase Asymmetrical Cascaded Multilevel Voltage Source Inverter, IET Power Electronics, Vol. 6, Iss. 8, PP.1696 - 1706, 2013
76-C.Y. Tan, A. Yaghoubi, S. Ramesh, S. Adzila, J. Purbolaksono, M.A. Hassan, M.G. Kutty, Sintering and mechanical properties of MgO-doped nanocrystalline hydroxyapatite, Ceramics International, vol.39,Issue 8, PP.8979-8983, 2013
77-Amir Eadzi AB. Gani and M. A. Hassan, Axial Crush Behaviour of Square Column with Tapered External Plunger, Journal of Engineering science, Assiut University, Faculty of Engineering, Vol 41, No4, PP.v, 2013
78-M. A. Hassan and Davoud Jafarlou, A Developed Process for Increasing Deep Rrawability of Rectangular Metal Cups with Extreme Aspect Ratio: Finite Element Simulation, International Journal of Mechanical and Materials Engineering, Vol. 8 No. 2, PP.11-24, 2013
79-S. Ramesh, S. Azilaa, C. K. L. Jeffrey, C. Y. Tan, J. Purbolaksono, A. M. Noor, M. A. Hassan, I. Sopgan and W. D. Teng, Properties of Hydroxyappitite synthesize by wet chemical , Journal of Ceramics Processing Research,, Vol. 14- No. 4, pp. 448~452., 2013
80-Nik Masmiati, Ahmed Aly Diaa Sarhan, Mohd Hamdi Abd Shukor, M. A. Hassan, "Investigate the Lubrication Effects on Cutting Force and Power Consumption in Up and Down End Milling", Advanced Materials Research , Vol 748, pp 264-286, 2013
81-M. A. Hassan, M. Hamdi, S. Naderi, F. Zahedi, Effect of curvature and thickness of Aluminum shell on the energy absorption in low velocity impact, Advanced Materials Research , Scientific,net, Vol 488, pp 40-45, March, 2012
البحث كاملا
82-K.Y. Sara Lee, K.M. Christopher Chin, S. Ramesh, C.Y. Tan, M.A. Hassan, J. Purbolaksono, W.D. Teng, Effect of Ultrasonication on Synthesis of Forsterite Ceramics. Advanced Materials Research, Advanced Materials Research , Vol 576, pp 252-255, November, 2012
83-S. M.Mirhassani, J. Ahmadian, M. J. Ghorbanian, M. A. Hassan, Sliding mode and PID controller in geostationary satellite attitude control , Asia-Oceania Top University League on Engineering, 2012. AOTULE’12,, Kuala Lumpur Malaysia; November 2012. , November, 2012
84-M. A. Hassan, Khaled I. A., N. Takakura , A developed Process for Deep Drawing of Metal Foils Square cups, of Materials Processing Technology(ISI-Cited Publication) , Vol. 212 , pp. 295 307 , 2012
85-M. A. Hassan, M. Hamdi, N. Noma , The Nonlinear Elastic and Viscoeleastic Passive Properties of Left ventricular Papillary Muscle of a Guiea Pig Heart, International, Journal of Mechanical behavior of biomedical materials, (ISI-Cited Publication) , Vol. 5 , pp. 99-109, 2012
86-M.A. Hassan, M. A. EL-Sharief and A. Aboul-Kasem, A fuzzy model for evaluation, prediction and control of slurry erosion of ductile materials;, Materials and Design (ISI-Cited Publication) , Vol. 39 , pp.186-191, 2012
87-R. A. Amir, Z. Taha, M. A. Hassan, , M. Hamdi , Effect of Slot on the Impact Response of Square Column, Adv. Sci. Lett., (ISI-Cited Publication) , Vol.13 , pp. 1-7, 2012
88-M.A. Hassan, A. Aboul-Kasem and M. A. EL-Sharief, F. Yusef, Evaluation of the material constants of nitrile butadeine rubbers (NBR) with different carbon black loading(CB)FEM-simulation and experimental; Polymer, (ISI-Cited Publication) , Vol 53 (17) , pp. 3807-3814, 2012
89-M. A. Hassan. M. A. E. Saleh, N. Takakura, S. Ramesh, J. Purbolaksono, Effect of bulge shape on wrinkling formation and strength of stainless steel thin sheet, Materials and Desig, ISI-Cited Publication, Vol.42, pp.37-45, 2012
90-Purbolaksono, M. A. Hassan, S. Ramesh, High operating steam pressure and localized overheating of a primary superheater tube, Engineering Failure Analysis , Vol 26, pp 344-348, 2012
91-M. Amiriyan1,a, W.J. Kelvin Chew2,b, S. Ramesh2,c, R. Tolouei, M.A. Hassan, A. Hossain,, Sopyan, S.Meenaloshini, Mechanical and Electrical Properties of Y-TZP/ZrB2 Composite, Advanced Materials Research, SCOPUS-Cited Publication , Vol. 576 , pp 228-231 , 2012
92-Shuaiby M. Shuaiby, M. A. Hassan, M .Taha , Modelling and simulation of the action potential in human cardiac Tissues using Finite element method, Journal of Communication and computer Engineering, Vol. 2/3, pp. 21:27, 2012
93-M. A. Hassan, M. Hamdi, S. Naderi, F. Zahedi , Effect of curvature and thickness of Aluminum shell on the energy absorption in low velocity impact, Advanced Materials Research , SCOPUS-Cited Publication, Vol. 488-489, pp 40-45, 2012
94-Shuaiby M. Shuaiby  Mohsen. A. Hassan  Moumen El-Melegy, Modeling and Simulation of The Action Potential In Human Cardiac Tissues Using Finite Element Method, Journal of Communication and computer Engineering, Volume 2, Issue 3, Pages 21: 27, 2012
95-Shuaiby M. Shuaiby, M. A. Hassan, Abdel-Badie Sharkawy and Abdel-Rasoul M.M.Gad, A finite Element Model for the Electrical Activity in Human Cardiac Tissues, Journal of Ecology of Health & Environment , Vol. 1, No. 1 , PP:25-33, 2012
96-M. A. Hassan, Ahmed A. D. Sarhan, A. Amano, Effect of Muscle Active Force and Fiber Orientation on the Left Ventricle Mechanics of Human Heart , Proceedings of the 2011 International Conference on Mechanical engineering, ICME 11, London, July 6-8, 2011, UK. , pp 2556-2561, June, 2011
97-Ahmed A. D. Sarhan, M. A. Hassan, M. A. Hamdi, High-Precision Machining by Measuring and Compensating the Error Motion of Spindle's Axis of Rotation in Radial Direction., Engineering Letters , Vol 19 N0 4, pp 310-315, December, 2011
98-Amir Radzi, M. A. Hassan, M. Hamdi, Zahari Taha, Impact response of Multi Slotted square column, JMechE, Vol. 8, No. 2:, pp. 71-91, 2011
99-N. Hatanaka, T. Iizuka, N. Takakura, K. Yamaguchi and M. A. Hassan, Friction aided deep drawing using blank holder divided into four segments, Journal of Japan Institute of Light Metals, Vol. 60(7) , pp.315- 320, 2010
100-L. M. A. Hezam, M.A. Hassan, I. M. Hassab-Allah, and M. G. El-Sebaie, Development of a new process for producing deep square cups through conical dies. International, ISI-Cited Publication, Vol.49 , pp.733-780, 2009
101-M. A. Hassan, Calibrating the Nonlinear elastic and viscoelatic tissue properties of ventricular myocytes from guinea pig heart, Journal of Engineering Science, Assiut University, Vol. 32-No.3 Part A, 2007
102-M. A. Hassan, I. Kanno and H. Kotera, Compound two dimensional thermo-elastic and thermodynamic analysis for C-axis Oriented Epitaxial Lead Titanaet thin films, Int. J. Vacuum, Vol.81 issue 4 , pp.459-465. , 2006
103-Y. Ichikawa, T. Matsunaga, M. A. Hassan, et al, Growth and structure of heteroepitaxial lead titanate thin films constrained by miscut strontium titanate substrates, J. Materials Research, JMR, Vol. 21 , pp. 1261-1268. , 2006
104-M. A. Hassan and K. Kotera, A novel micro-device for measuring the electromechanical properties of a single myocyte, International Symposium on Development of Mechatronics Education, Egypt, 2006
105-H. Kotera, N .Fujiwara, M. A. Hassan, Multi-functional cell mapping device, 4rd Assiut University Int. Conf. on Mech. Eng. Advanced Tech. for Indus. Prod. MEATP4, Egypt, 2006
106-M. A. Hassan, R. Suenaga, N. Takakura and K. Yamaguchi, A novel process on friction aided deep drawing using tapered blank holder divided into four segments, Journal of Materials Processing Technology , Vol.159 , pp.418-425, 2005
107-M. A. Hassan and Abouel-kasem, A Novel Friction Aided Deep Drawing Process for Producing Deep Square Cups, Eighth International Cairo University MDP Conference, Cairo-Egypt, Volume II, pp.961 , 2004
108-M. A. E. Saleh and M. A. Hassan, Wrinkling inclusion into thin flat sheets; A proposed method for enhancing strength, Journal of Engineering Science, Assiut University, pp.1183-1197. , 2004
109-A. Abouel-Kasem and M. A. Hassan, Sliding contact analysis of Viscoelastic cylinders, Proceeding of the eighth international Cairo-Egypt University MDP conference, pp. 101-111, 2004
110-M. A. Hassan and A. Amano, Study of the effective boundary conditions in finite element simulation of the heart mechanics, 2nd Kyoto University international Symposium of Leading project for bio-simulation, Japan, 2004
111-M. A. Hassan and K. Kotera, A novel micro-device for measuring the electromechanical properties of a single myocyte, International Conference on Micro Total Analysis Sweden, 2004
112-M. A. Hassan, N. Takakura K. Yamaguchi, Friction aided deep drawing using newly developed blank-holder divided into eight segments. International, Journal of Machine Tools and Manufacture, Vol. 43, pp. 637-646, 2003
113-M. A. Hassan, N. Takakura and K. Yamaguchi, A novel technique of Friction aided deep drawing using blank-holder divided into four segments, Journal of Materials Processing Technology, Vol.139 , pp.408-413, 2003
114-M. A. Hassan, N. Takakura and K. Yamaguchi, Friction aided deep drawing of sheet metals using polyurethane ring and auxiliary metal punch, Part 1: experimental observations on deep drawing of aluminum thin sheets and foils, International , Journal of Machine Tools and Manufacture, Vol.42 , pp. 625-631, 2002
115-M. A. Hassan, K. Yamaguchi and N. Takakura, A Fuzzy model for prediction of forming pressure in the Maslennikov s deep drawing process, JSME/ASME Int. Conf. on materials and processing, Hawai, ISI/SCOPUS Cited Publication, 2002
116-M. A. Hassan, A Fuzzy model for prediction of flow-stress in metal forming, 3rd Assiut University Int. Conf. on Mech. Eng. Advanced Tech. for Indus. Prod. MEATP3 Egypt, Vol.2, Pp.411-417. , 2002
117-M. A. Hassan, N. Takakura and K. Yamaguchi, Friction aided deep drawing of sheet metals using polyurethane ring and auxiliary metal punch, Part 2: analysis of the drawing mechanism and process parameters, International, Journal of Machine Tools and Manufacture, Vol. 42 , pp. 633-642, 2001
118-M. A. Hassan, K. Yamaguchi and N. Takakura, A Fuzzy model for prediction of flow-stress in metal forming, Proceedings of the Int. Conf. on materials processing, Simulation of Materials Processing: Theory, Methods and Applications: Proceedings of the 7th International Conference on Numerical Methods in Industrial Forming Processes--NUMIFORM 2001, Toyohashi, Japan, 18-20 June 2001 , Taylor & Francis, pp 303-308, 2001
119-M. A. Hassan, K. Yamaguchi and N. Takakura, A Novel technique on friction aided deep drawing using blank holder divided into four segments, Proceedings of the Ninth International Manufacturing Conference in China IMCC, ISI-Cited Publication, Vol. 1, Pp.21-22, 2000
120-M. A. Hassan, I. M. Hassaballa, M. A. E. Saleh& M.G. El- Sebaie, Finite element simulation of OSU friction test, Proc. The Fifth Int Conf. on Production Engineering and design, For Development PEDD5, Ein Shams, Non-ISI/Non-SCOPUS Cited Publication, pp.213-226, 1998
الاشراف على رسائل الماجستير و الدكتوراه :
1- أبو محمد سيف الله, دراسة آلية القطع في الفولاذ المقاوم للصدأ-304 لعينات مربعة باستخدام CO2 ليزر , ماجستير, 01-04-2017
المشرفون : Dr. Nukman Bin Yusof Prof. Dr. Mohsen Abdul Naeim Hassan Mohamed
2- م.أحمد عبد العليم, تعظيم الاستفادة من أنظمة المخزون فى علميات الانتاج المعيبة, ماجستير, 13-12-2016
المشرفون : أ.د. محمد جاد السباعى أ.د. محسن عبد النعيم حسن د. محمود الشريف
3- مؤيد أبو رميله, منصة لمحاكاة التحكم فى طائرة بدون طياررباعية الدفع على جهاز كمبيوتر شخصى , ماجستير, 09-09-2016
المشرفون : أ.د. محسن عبد النعيم حسن د.عزيزى ( ماليزيا )
4- موى ون, تطوير نظام تصوير ميزوسكوبى لفحص السطوح, دكتوراة, 15-01-2016
5- Fadi M. Albatsh,, التحكم الفازى لزيادة قدرة تدفق الطاقة الموحدة : المحاكاة والتطبيق, دكتوراة, 09-12-2015
المشرفون : Professor Saad Mekhlif Associate professor Hazli Mokhles Professor Mohsen Abdelnaein Hassan
6- م٠ ندرى سجاد , سلوك الضرر الحادث لشرائح البوليمر المقواه بالألياف الزجاجية ومشتقة هيدروكسيباتيت تحت تأثير سرعات صدم منخفضة , دكتوراة, 21-08-2015
المشرفون :
7- داليا حسين الجابورى, الطرق الغير قطعية لنمذجة ومحاكاة عملية الطلاء بالتبخيرالفيزيائي, ماجستير, 18-06-2015
المشرفون : أ.د. محسن عبدالنعيم حسن محمد
8- نيك ماسماتى بنت أحمد, تأثيرات عوامل القطع وظروف التزليق على الإجهات المتبقية وجودة الاسطح المعدنية المشغلة بالطحن., دكتوراة, 12-06-2015
المشرفون : أ. د. حمدى عبد الشكور ~ ماليزيا أ.د. محسن عبدالنعيم حسن ~ اسيوط أ.م. أحمد على
9- حسن طارق المشهداني, النمذجة والمحاكاة لعملية التحكم فى مروحية رباعية باستخدام حاكمات PID , ماجستير, 19-01-2015
المشرفون : أ.د / محسن عبدالنعيم حسن محمد
10- مفلح الوزانى , النمذجة والمحاكاة لمستشعر دقيق للكشف باللمس عن مدى تصلب الانسجة اللينة , ماجستير, 15-01-2015
المشرفون : أ.د / محسن عبدالنعيم حسن محمد
11- رضا مشوان, لحام المزج بالإحتكاك لسبائك الألومنيوم AA5052: التجربة والمحاكاة, ماجستير, 03-12-2014
المشرفون : أ.د / محسن عبد النعيم حسن - جامعة أسيوط د/ فرظيلة يوسف - جامعة مالايا - ماليزيا
12- حمزة بلكامل, تصميم جديد لعاكس ثلاثى الاطوار متعدد المستويات ذو نصف جس متتالى, ماجستير, 19-09-2014
المشرفون : أستاذ دكتور/ سعد مخيلف أستاذ مساعد / محسن عبدالنعيم حسن
13- محمد الباهى عبد الحميد الفقى, نمذجة ومحاكاة عملية الطلاء الأيونى بالمعجل الكهرومفناطيسى , ماجستير, 05-06-2014
14- أمير راضى بن عبد الغنى, استجابة مواسير الألومنيوم المربعة للصدم بعد تزويدها بأليات قدح مبتكرة, دكتوراة, 29-05-2014
15- عبدالله إبراهيم محمد حسب الله, تحليل حركة البطين الايسر لقلب الانسان وخواصه الميكانيكية باستخدام العناصر المحدودة , ماجستير, 26-05-2014
16- م. داوود جعفرول, عملية مطورة للحسب العميق لكؤوس مستطيلة ذات نسب تحدب عالية, ماجستير, 26-06-2013
المشرفون : أ.د. محسن عبدالنعيم حسن محمد
17- رضا محموديان , تطوير تقنيات جديدة لتصنيع المواد المكونة بالانتشارالذاتى لدرجات حرارة عالية , دكتوراة, 25-06-2013
المشرفون : Associate professor Dr Mohsen Abdelnaeim Hassan
18- أزهربن عبدالستار, المحاكاة بالعناصر المحدوة مع التحقيق التجريبى لعملية الدرفلة السطحية لرقانق الحديد منخفض الكربون, ماجستير, 25-06-2013
19- بلال أحمد عبدالعزيز السيد, تطوير وحدة تحكم فازى غير خطية لتطبيقات هندسة الميكاتورنيات, ماجستير, 25-10-2012
20- داود مشادى جعفرول, عملية مطورة لزيادة نسب السحب العميق لكوؤس مستطيلة ذات نسب تحدب عالية : تصميم ومحاكاة, ماجستير, 25-07-2012
21- أحمد خلف موسى, دراسة عن المنطق الفازى والأنظمة الفازية : نمزجة وتطبيقات , دكتوراة, 28-03-2012
المشرفون : أ.د. أحمد محمد زهران أ.د. محمد عزب عبدالله د. محسن عبدالنعيم حسن
22- لبيب مدهش علي حزام , خصائص التشكيل في السحب العميق للكؤوس المربعة للرقائق المعدنية خلال قوالب مخروطية بدون مثبت, دكتوراة, 25-10-2009
المشرفون : محمد جاد السباعي , إبراهيم محمد حسب الله , محسن عبد النعيم حسن
عدد المقرارات0 مقرر