ah-hamza@aun.edu.eg

Faculty of Engineering

Assiut University

Department
Power Mechanical Engineering Department
Fax No
+0882080553
Email:
drahmedhamza@yahoo.com
MIS Email
ah-hamza@aun.edu.eg
Mobile
01223971265
Office
N/A - 1146
Google Scholar
google_scholar

Ph. D. In () , Faculty of Engineering Muroran Institute of Technology, Japan , 1999
M. Sc. In Mechanical Engineering () , Faculty of Engineering Assiut - University , 1992
B. Sc. In Mechanical Engineering () , Faculty of Engineering Assiut - University , 1986


Professor Faculty of Engineering, Assiut University , 2009

Associate Professor Faculty of Engineering, Assiut University , 2004

Lecturer Faculty of Engineering, Assiut University , 1999

Assistant Lecturer Faculty of Engineering, Assiut University , 1992

Demonstrator Faculty of Engineering, Assiut University , 1987


Supervisor of "Faculty Of Engineering Workshop" Faculty of Engineering, Assiut University ,since 2017-12-27 To 09-2021

Head Faculty of Engineering, Assiut University ,since 2017-07-30 To 1-2022

# Title Research Year
1 Performance-cost and global warming assessments of two residential scale solar cooling systems versus a conventional one in hot arid areas
 		2017
2 Performance and environmental impact of a turbojet engine fueled by blends of biodiesels
 		2017
3 Design optimization of staggered plates’ channel heated by radiation heat flux based on the convective heat transfer and fluid flow for hybrid Photovoltaic/Thermal system
 		2017
4 Residential scale solar driven cooling systems versus conventional air-conditioning in hot arid areas: A comparative study
 		2017
5 Performance of a small-scale solar-powered adsorption cooling system
 		2017
6 Performance assessment and gained operational experiences of a residential scale solar thermal driven adsorption cooling system installed in hot arid area 2017
7 Energy performance, environmental impact, and cost assessments of a photovoltaic plant under Kuwait climate condition
 		2017
8 Design optimization of a residential scale solar driven adsorption cooling system in upper Egypt based
 		2016
9 Double Skin Façade: The state of art on Building Energy efficiency 2015
10 The onset of liquid entrainment from a stratified two-phase region through small branches 2014
11 Intelligent Façade: The State of Art based on Outdoor Environment and Indoor thermal Comfort 2014
12 Development of Intelligent Façade Based on Outdoor Environment and Indoor thermal Comfort 2014
13 Experimental Study on ThermalComfort Conditions in Existing Public Primary Schools Buildings in Upper Egypt 2014
14 An Analysis of Thermal Comfort and Energy Consumption within Public Primary Schools in Egypt 2014
15 Energy Conservation in Existing Office Building: Case study Petrojet Company Head Office Buildings in Cairo, Egypt 2014
16 Effect of hot and cold buffers on the performance of a residential scale solar driven adsorption cooling system 2013
17 Performance Assessment of a Solar Powered Residential Scale Adsorption Cooling System at Assiut, Egypt 2013
18 Investigation of heat transfer and fluid flow in transitional regime inside a channel with staggered plates heated by radiation for PV/T System 2013
19 Experimental study on adsorption-desorption characteristics of Granular Activated Carbon/R134a pair 2012
20 Heat Transfer and Fluid Flow in Transitional Regime inside a Channel with Staggered Plates Heated By Radiation 2012
21 Hybrid adsorption cooling systems- An overview 2012
22 Study on Heat and Mass Transfer during Urea Prilling Process. Int. 2012
23 Photovoltaic Module Thermal Regulation: Effect of the Cells Arrangement Configurations on the Performance. Int. J 2011
24 Theoretical Model for the Formation of Functional Micro- and Nano-Particles from Combustion of Emulsion Droplets 2011
25 One Dimensional Model of Viscous Liquid Jets Breakup 2011
26 A review on adsorption cooling systems with adsorbent carbon 2011
27 A Theoretical Model for the Formation of Functional Micro- and Nano-Particles from Combustion of Emulsion Droplets 2011
28 Photovoltaic Module Thermal Regulation: Effect of the Cells Arrangement Configurations on the Performance. 2010
29 Study of Heat Transfer and Fluid Flow in Transitional Regime Inside a Channel with Offset Plates Heated By Radiation. 2010
30 Methanol Crossover in Direct Methanol Fuel Cells for Portable Applications: Achievements and Challenges. 2010
31 Energy Efficiency and Indoor Thermal Perception: A Comparative Study between Radiant Panel and Portable Convective Heaters. 2010
32 Performance and Operational Experiences of Solar Driven Cooling Plant after Five Years in Operation. 2010
33 Performance of an Absorber with Hydrophobic Membrane Contactor at Aqueous Solution-Water Vapor Interface. 2010
34 For designing a compact absorber with membrane contactor at liquid-vapor interface: Influence of membrane properties on water vapour transfer 2010
35 Design of a Compact Absorber with a Hydrophobic Membrane Contactor at the Liquid Vapor Interface for Lithium Bromide-Water Absorption Chillers 2010
36 Characteristics of Heat Transfer and Fluid Flow in a Channel with Single-Row Plates Array Oblique to Flow Direction for Photovoltaic 2010
37 Design of a compact absorber with a hydrophobic membrane contactor
at the liquid–vapor interface for lithium bromide–water absorption chillers 		2010
38 Performance and Operational Experiences of Solar Driven Cooling Plant after Five Years in Operation. Int. J 2010
39 Energy efficiency and indoor thermal perception:
a comparative study between radiant panel and portable
convective heaters 		2010
40 Performance of an Absorber with Hydrophobic Membrane Contactor at Aqueous Solution-Water Vapor Interface 2010
41 A New Criterion for the Onset of Liquid Entrainment from a Stratified Two-Phase Region through Small branches. 2009
42 Characteristics of the membrane utilized in a compact absorber for lithium bromide-water absorption cooling chillers 2009
43 Delineation of frost formation on cold walls by aid of psychrometric saturation: Formula of demarcation and frost characteristics 2009
44 Delineation of Frost Characteristics on Cold Walls by Using a New Formula for Psychrometrics Demarcation Boundary 2008
45 Performance assessment of an integrated free cooling and solar powered single-effect lithium bromide-water absorption chiller for the duration of five years 2008
46 Performance Assessment of an Integrated Free Cooling and Solar Powered Single-Effect Lithium Bromide-Water Absorption Chiller 2008
47 Evaporator Air-Side Fouling: Effect on Performance of Room Air Conditioners and Impact on Indoor Air Quality 2008
48 Experimental Study on the Performance of a Solar Driven Steam Jet Ejector Chiller 2008
49 Evaporator Air-Side Fouling: Effect on Performance of Room Air Conditioners and Impact on Indoor Air Quality. 2008
50 Evaporator Air-Side Fouling: Effect on Performance of Room Air Conditioners and Impact on Indoor Air Quality. Int. J 2008
51 Operational experiences of a solar cooling plant 2008
52 Characteristics of the membrane utilized in a compact absorber for lithium bromide-water absorption chillers. 2008
53 Experimental study on performance of solar driven steam jet ejector chillier 2007
54 Effect of the evaporator airside fouling on performance of unitary air conditioners and its impact on indoor air quality 2007
55 Experimental Investigation of Comfort Sensation and Performance of Radiant Heating Panel Compared With Conventional Oil Heater 2007
56 Effects of Condensate and Initial Formation of Thin Frost Layer on Evaporator Coil Performance of Room Air-Conditioner 2007
57 Passive cooling of water at night in uninsulated open tank in hot arid areas 2007
58 Solar Driven Steam Jet Ejector Chiller 2007
59 Natural Cooling of Water at Night in Un-Insulated Open Tank by Evaporation, Convection, and Sky Radiation in Hot Arid Areas 2005
60 استخدام برمجيات المحاكاة المتقدمة في العمليات الصناعية لضبط محتويات الانبعاثات الغازية والجسيمات الناتجة عن حرق أنواع الوقود المختلفة لتتوافق بيئيا 2005
61 Characteristics of Flow and Heat Transfer For In-Line Plate Segments Inside Channel Used For Photovoltaic Modules Thermal Regulation 2005
62 Effects of Configuration Parameters on Heat Transfer and Flow Characteristics in Transitional Regime inside Channel With Staggered Plate Segments Heated by Radiation. J 2004
63 Effects of configuration parameters on heat transfer and flow characteristics in transitional regime inside channel with staggered plate segments heated by radiation 2004
64 Effect of Quarter-Circle-Shaped Supply Inlet on the Room Air Flow Patterns, Temperature Profiles and Convective Heat Transfer Coefficient. J 2003
65 Effect of Design and Operating Parameters on the Convection Heat Transfer and Fluid Flow in Wavy Channel with Upper Wall Heated by Radiation. J 2002
66 Experimental Study on Laminar Flow Forced-Convection in a Channel with Upper V-Corrugated Plate Heated by Radiation. Int. J 2002
67 Feasibility of implementing desiccant enhanced nocturnal radiative cooling-solar collector system for air comfort application in hot arid areas of upper Egypt 2002
68 Experimental Study on Laminar Flow Forced-Convection in a Channel with Upper V-Corrugated Plate Heated by Radiation 2002
69 Characteristics of Forced-Convection Heat Transfer for Air Flowing in Transitional Regime Through Channel With Offset Plates Heated by Radiation Bulletin 2001
70 Numerical Study on Design Parameters of a Channel with Offset Plates Heated by Radiation, Based on Maximum Forced Convection Heat Transfer Coefficient and Minimum Friction Factor. NAFEMS Int. J 2000
71 Numerical Study on Design Parameters of a Channel with Offset Plates Heated by Radiation, Based on Maximum Forced Convection Heat Transfer Coefficient and Minimum Friction Factor 2000
72 Numerical Study on Laminar Flow Forced-Convection Heat Transfer for Air in Channel with Offset Plates Heated by Radiation Heat Flux 1998
73 Effect of Aging Thickness and Color on Both the Radiative Properties of Polyethylene Films and Performance of the Nocturnal Cooling Unit 1998
74 Experimental Study on Short Term Thermal Energy Storage in Rock Bed Using Solar Radiation Simulation System 1998
75 A Fundamental Study on Combined Free and Forced Convective Heat Transfer form a Vertical Plate Followed by a Backward Step 1998
76 Thermal Characteristics of Storage Tank with Air Heating Solar Collector 1998
77 Experimental Study of Laminar Flow forced-Convection Heat Transfer in Air Flowing through Offset Plates Heated by Radiation Heat Flux 1998
78 Study on Design Parameters and characteristics of Laminar Flow Forced Convection Heat Transfer in a Channel with Offset Plates Heated by Radiation 1998
79 Study on Energy Storage Characteristics of Rock Bed by Using Solar Radiation Simulation System 1998
80 Unstable Behaviors of Combined Free and Forced Convective Heat Transfer from a Vertical Plate Followed by a Backward Step 1998
81 Study on High Performance Solar air Heater Collectors with Rock Bed Storage System 1998
82 Study on Dynamic Behavior of Laminar Flow Forced Convection Heat Transfer in a Channel Having Offset Plates Heated by Radiation 1998
83 A Transient Behavior of Forced Laminar Convective Heat Transfer in a Channel with Offset Plates Heated by Radiation 1997
84 Numerical Analysis of Laminar Forced-Convection Heat Transfer in Air Flowing Through Offset Plates Heated by Radiation Heat Flux 1997
85 Forced Laminar Convection Heat Transfer of Air with Offset Plates Heated by Radiation I- Experimental Study 1997
86 Forced Laminar Convection Heat Transfer of Air with Offset Plates Heated by Radiation II- Numerical Study 1997
87 Effect of Inlet Air Bulk Temperature on Steady-State Laminar Flow Convection Heat Transfer Coefficient of Air With Offset Plates Heated by Radiation 1997
88 A Numerical Study of the Solar Thermal Energy Storage System in A Rock Bed 1997
89 Experimental Study of Thermal Performance for Two Types Air Solar Collectors (V-Corrugated Absorber Compared with Offset Plates Absorber) 1997
90 Cooling of Water Flowing Through a Night Sky Radiator Solar Energy 1995

1- Nayera Refaat Abd-Allah Abd-Elhafez , ASSESSMENT OF ENERGY STATUS FOR OFFICE BUILDINGS USING THE WORLD STANDARDS OF ENERGY STAR SYSTEM ,2015-09-30
supervisor: 1- Prof. Ali K. Abdel-Rahman Chairperson, Energy Recourses Engineering ……………………… 2- Prof. Ahmed Hamza H. Ali Professor at Mechanical Engineering Department, Faculty of Engineering, Assiut University ……………………… 3- Dr. Shinichi OOKAWARA Associate Prof


supervisor: zxczx

3- Mahmoud Nady Abdel-Moez Atta , Optimization of Thermal Storage System Integrated in A Solar Powered Adsorption Cooling System ,2015-01-20
supervisor: Prof. Dr. Ibrahim Mohamed Ismael Prof. Dr. Ahmed Hamza H. Ali Prof. Dr. Ali Kamel Abdel-Rahman

4- Mahmoud Nady Abdel-Moez Atta , Optimization of Thermal Storage System Integrated in a Solar Powered Adsorption Cooling System ,2014-12-04
supervisor: Ibrahim Mohamed Ismael Ahmed Hamza H. Ali Ali kamel Abdel-Rahman
 

الجمعيات العلمية و النقابات :

Research Projects