Ahmed Aly Diaa Mohammed Sarhan

Faculty of Engineering

Assiut University

Department
Mechanical Design and Production Engineering Department
Email:
ah_sarhan@yahoo.com
MIS Email
ahmed.sarhan@eng.au.edu.eg
Office
N/A - 031150
Google Scholar
Google Schoolar

Ph. D. In Mechanical Engineering (Precision Engineering) , Faculity of Engineering Kyoto University - japan , 2007
M. Sc. In Mechanical Engineering (Manufacturing Engineering) , Faculity of Engineering Assiut University , 1999
B. Sc. In Mechanical Engineering (Manufacturing Engineering) , Faculity of Engineering Assiut University , 1992


Associate Professor Faculty of Engineering, ِِAssiut University , 2013

Lecturer Faculty of Engineering, Assiut University , 2007

Assistant Lecturer Faculty of Engineering, Assiut University , 1999

Demonstrator Faculty of Engineering, Assiut University , 1992
# Title Research Year
1 Biomedical materials and techniques to improve the tribological, mechanical and biomedical properties of orthopedic implants – A review article
 		2017
2 Ultrasonic assisted grinding of advanced materials for biomedical and aerospace applications—a review
 		2017
3 Development of new fabrication and measurement techniques of micro-electrodes with high aspect ratio for micro EDM using typical EDM machine
 		2017
4 Proposing a new performance index to identify the effect of spark energy and pulse frequency simultaneously to achieve high machining performance in WEDM
 		2017
5 Micro-electrode fabrication processes for micro-EDM drilling and milling: a state-of-the-art review
 		2017
6 Electrochemical corrosion behavior of carbon steel pipes coated with a protective ceramic layer using plasma and HVOF thermal spray techniques for oil and gas
 		2016
7 Employing severe plastic deformation to the processing of electrical discharge machining electrodes
 		2016
8 Optimization of cutting conditions for minimum residual stress, cutting force and surface roughness in end milling of S50C medium carbon steel
 		2016
9 State of the art in powder mixed dielectric for EDM applications
 		2016
10 Performance evaluation of latent heat energy storage in horizontal shell-and-finned tube for solar application
 		2016
11 Development and protection evaluation of two new, advanced ceramic composite thermal spray coatings, Al2O3-40TiO2and Cr3C2-20NiCr on carbon steel petroleum oil piping
 		2016
12 Cutting force analysis to estimate the friction force in linear guideways of CNC machine
 		2016
13 Development of tantalum oxide (Ta-O) thin film coating on biomedical Ti-6Al-4V alloy to enhance mechanical properties and biocompatibility
 		2016
14 Multi-objective selection and structural optimization of the gantry in a gantry machine tool for improving static, dynamic, and weight and cost performance
 		2016
15 Enhancing the adhesion strength of tantalum oxide ceramic thin film coating on biomedical Ti-6Al-4V alloy by thermal surface treatment
 		2015
16 The tribological and electrochemical behavior of HVOF-sprayed Cr3C2-NiCr ceramic coating on carbon steel
 		2015
17 Fuzzy logic-based approach to investigate the novel uses of nano suspended lubrication in precise machining of aerospace AL tempered grade 6061
 		2015
18 Novel uses of SiO2nanolubrication in end milling of medium carbon steel for higher compressive residual stress measured by high-energy X-ray diffraction data
 		2015
19 Investigating the machinability of Al-Si-Cu cast alloy containing bismuth and antimony using coated carbide insert
 		2015
20 Investigation about the characterization of machine tool spindle stiffness for intelligent CNC end milling
 		2015
21 Improve wire EDM performance at different machining parameters - ANFIS modeling
 		2015
22 Fuzzy logic based model for predicting surface roughness of machined Al-Si-Cu-Fe die casting alloy using different additives-turning
 		2015
23 Optimizing cutting parameters in inclined end milling for minimum surface residual stress - Taguchi approach
 		2015
24 Measuring of positioning, circularity and static errors of a CNC Vertical Machining Centre for validating the machining accuracy
 		2015
25 Employing Ti nano-powder dielectric to enhance surface characteristics in electrical discharge machining of AISI D2 steel
 		2015
26 Nonlinear Dynamic Analysis of a New Antibacklash Gear Mechanism Design for Reducing Dynamic Transmission Error
 		2015
27 Enhancing the tribo-mechanical properties of aerospace AL7075-T6 by magnetron-sputtered Ti/TiN, Cr/CrN & TiCr/TiCrN thin film ceramic coatings 2014
28 Investigating the Possibility to Reduce the Residual Stress Level in 2.5D Cutting Using Titanium Coated Carbide Ball End Mill 2014
29 Plasma thermal spray of ceramic oxide coating on carbon steel with enhanced wear and corrosion resistance for oil and gas applications 2014
30 Cutting force-based adaptive neuro-fuzzy approach for accurate surface roughness prediction in end milling operation for intelligent machining 2014
31 Investigation of the effect of machining parameters on the surface quality of machined brass (60/40) in CNC end milling—ANFIS modeling 2014
32 (MQL) Lubrication for Better Surface Quality and More Safe Environments in End-Milling 2013
33 Investigating the Effects of Liquid Atomization and Delivery Parameters of Minimum Quantity Lubrication on the Grinding Process of Al2O3 Engineering Ceramics 2013
34 Adhesion Strength Predicting of Cr/CrN Coated Al7075 Using Fuzzy Logic System for Fretting Fatigue Life Enhancement 2013
35 Fretting Fatigue Life Evaluation of Multilayer Cr-CrN Coated Al7075-T6 with Higher Adhesion Strength-Fuzzy Logic Approach 2013
36 Optimizing the PVD TiN Thin Film Coating s parameters on Aerospace AL7075-T6 Alloy for Higher Coating Hardness and Adhesion with Better Tribological Properties of the Coating Surface 2013
37 Electrical and Optical Properties of Indium-tin Oxide (ITO) Films Prepared by Ion-Assisted Deposition (IAD) at Room Temperature 2013
38 The 15th IEEE Saudi Technical Exchange Meeting (STEM) conference, King Fahd University of Petroleum & Minerals, Dhahran, Saudi Arabia 2013
39 An investigation of optimum SiO2 nanolubrication parameters in end milling of aerospace Al6061-T6 alloy 2013
40 Minimum Quantity Lubrication in Grinding Process of Zirconia (ZrO2) Engineering Ceramic 2013
41 Investigate the Lubrication Effects on Cutting Force and Power Consumption in Up and Down End Milling 2013
42 Investigating the fretting fatigue life of thin film titanium nitride coated aerospace Al7075-T6 alloy 2013
43 Investigate the Effects of Hard Anodizing Parameters on Surface Hardness of Hard Anodized Aerospace AL7075-T6 Alloy Using Fuzzy logic approach for Fretting Fatigue Application 2013
44 Development of SiO2 Nanolubrication System for better surface Quality, More Power Savings and Less Oil Consumption in Hard Turning of Hardened Steel AISI4140 2013
45 The influence of Higher Surface Hardness on Fretting Fatigue Life of Hard Anodized aerospace AL7075-T6 Alloy 2013
46 Analytical Modeling of Grinding Wheel Loading Phenomena 2013
47 Surface Hardness Prediction of CrN Thin Film Coating on AL7075-T6 Alloy Using Fuzzy Logic System 2013
48 Fabrication and deformation behaviour of multilayer Al2O3/Ti/TiO2 nanotube arrays 2013
49 Investigation on the Machine tool Spindle and/or Bearing Thermal Error Motions 2012
50 Prediction of Burnishing Surface Roughness of Brass using Fuzzy Rule Based System 2012
51 Modeling of Machine Tool Spindle Stiffness for Accurate Monitoring of Cutting Forces for Intelligent Machining 2012
52 A Novel Method for Determination of Grinding Wheel Loading 2012
53 A Fuzzy Logic Based Model to Predict the Fretting Fatigue Life of Aerospace Al7075-T6 Alloy 2012
54 Monitoring of Tool Wear and Surface Roughness in End-Milling for intelligent machining 2011
55 High-Precision Machining by Measuring and Compensating the Error Motion of Spindle s Axis of Rotation in Radial Direction 2011
56 Compensation Method of the Machine Tool Spindle Thermal Displacement for Accurate Monitoring of Cutting Forces 2011
57 Development of nanoparticle suspended lubrication system in machining process for less power consumption and pollution 2011
58 Effect of Muscle Active Force and Fiber Orientation on the Left Ventricle Mechanics of Human Heart Proceedings of the 2011 International Conference on Mechanical engineering, ICME 11, London 2011
59 Development of a Cutting Force Monitoring System for Intelligent Machining 2006
60 Monitoring Method of Cutting Force by Using Additional Spindle Sensors 2006
61 Research on Spindle and Machining Process Monitoring for Intelligent Machine Tools 2005
62 Monitoring of Cutting Force using Spindle Displacement Sensor 2004
63 Monitoring of Machining Process by Using Spindle Displacement Sensors 2004
64 Interrelation Between Cutting Force Variation and Tool Wear in End-Milling 2001
65 Force Based Model for Automated Surface Roughness Prediction in Slot Milling 2001
66 Monitoring of Tool Wear in End Milling Using Cutting Force Modeling 1998

الجمعيات العلمية و النقابات :

Research Projects