Current Address

:

Office Tel.

:

Mobile No.

:

E-Mail

:

google scholar link

:

• Professor, Department of Mechanical Engineering , Faculty of Engineering, ِِAssiut University, 2014

• Associate Professor, Department of Mechanical Engineering , Faculty of Engineering, Assiut University, 2008

• Lecturer, Department of Mechanical Engineering , Faculty of Engineering, Assiut University, 2002

• Assistant Lecturer, Department of Mechanical Engineering , Faculty of Engineering, Assiut University, 1998

• Demonstrator, Department of Mechanical Engineering , Faculty of Engineering, Assiut University, 1993

Publications:

1 - Nyanor, P.; Hamada, A.S.; Hassan, M.A. , Ballistic impact simulation of proposed bullet proof vest made of TWIP steel, water and polymer sandwich composite using Fe-SPH coupled technique , Key Engineering Materials , v 786, p 302-313, 2018

2 - Ahmed Abdel-Aleem, Mahmoud A. El-Sharief, Mohsen A. Hassan and Mohamed G. El-Sebaie, Implementation of Fuzzy and Adaptive Neuro-Fuzzy Inference Systems in Optimization of Production Inventory Problem, Applied Mathematics & Information Sciences, Naturlapublication, Vol. 11, No. 1, pp.1-10, January, 2017

3 - Ahmed Abdel-Aleem, Mahmoud A. El-Sharief, Mohsen A. Hassan and Mohamed G. El-Sebaie, Implementation of Fuzzy and Adaptive Neuro-Fuzzy Inference Systems in Optimization of Production Inventory Problem, Applied Mathematics & Information Sciences , Natural Sciences Publishing, vol. 11, no. 1, pp. 289–298, http://www.naturalspublishing.com/Article.asp?ArtcID=12616, January, 2017

Full text

4 - Ahmed Abdel-Aleem, Mahmoud A. El-Sharief, Mohsen A. Hassan, Mohamed G. El-Sebaie, A surface response optimization model for EPQ system with imperfect production process under rework and shortage, OPSEARCH , Springer India, 54, http://link.springer.com/article/10.1007/s12597-017-0301-1, February, 2017

Full text

5 - D Abidou, N Yusoff, N Nazri, MAO Awang, MA Hassan, AAD Sarhan , Numerical simulation of metal removal in laser drilling using radial point interpolation method , Engineering Analysis with Boundary Elements , Vol 77, pp 89-96, April, 2017

6 - D Abidou, N Yusoff, N Nazri, MAO Awang, MA Hassan, AAD Sarhan , Numerical simulation of metal removal in laser drilling using symmetric smoothed particle hydrodynamics , Precision Engineering, http://dx.doi.org/10.1016/j.precisioneng.2017.01.012, 2017

7 - Ahmed Abdel-Aleem, Mahmoud A. El-Sharief, Mohsen A. Hassan and Mohamed G. El-Sebaie, Optimization of reliability based model for production inventory system, International Journal of Management Science and Engineering Management, Taylor & Francis, 12, 1-11, http://www.tandfonline.com/doi/abs/10.1080/17509653.2017.1292156, April, 2017

8 - S Peirovi, M Pourasghar, AF Nejad, MA Hassan, A study on the different finite element approaches for laser cutting of aluminum alloy sheet , The International Journal of Advanced Manufacturing Technology, Springer, DOI: 10.1007/s00170-017-0599-0, 2017

9 - Abdelsalam, Amir A.; Araby, Sherif; Hassan, M.A.; El-Moneim, A.A. , Constitutive modelling of elastomer/graphene platelet nanocomposites , IOP Conference Series: Materials Science and Engineering , v 244, n 1, October, 2017

10 - DM Jafarlou, E Zalnezhad, MA Hassan, MA Ezazi, NA Mardi , Severe plastic deformation of tubular AA 6061 via equal channel angular pressing , Materials & Design , Elsevier, Vol 90 - No 15, , Pages 1124–1135, January, 2016

11 - S Naderi, A Dabbagh, MA Hassan, BA Razak, Modeling of porosity in hydroxyapatite for finite element simulation of nanoindentation test, Ceramics International, Elsevier, Volume 42, Issue 6, Pp. 7543–7550, May, 2016

12 - Nik Masmiatia Ahmed A.D. Sarhanb, Mohsen Abdel Naeim Hassanb, Mohd Hamdib, Optimization of cutting conditions for minimum residual stress, cutting force and surface roughness in end milling of S50C medium carbon steel, Measurement , Volume 86 , Pages 253–265, May, 2016

13 - HY Moayad, M.A Hassan, B Mardi, N Azizi, A PC‐based simulation platform for a quadcopter system with self‐tuning fuzzy PID controllers , Computer Applications in Engineering Education, Vol 24, No.6, pp. 934-950, June, 2016

14 - A. M. Sifullah, Y. Nukman, M. A. Hassan and A. Hossain , Finite element analysis of fusion laser cutting on stainless steel-304, ARPN Journal of Engineering and Applied Sciences, , VOL. 11, NO. 1, pp.181-189. , 2016

15 - Masmiati, Nik; Sarhan, Ahmed A.D.; Hassan, Mohsen Abdel Naeim; Hamdi, Mohd , Optimization of cutting conditions for minimum residual stress, cutting force and surface roughness in end milling of S50C medium carbon steel , Measurement: Journal of the International Measurement Confederation , v 86, p 253-265, May, 2016

16 - Naderi, Sadjad; Dabbagh, Ali; Hassan, Mohsen Abdelnaeim; Razak, Bushroa Abdul; Abdullah, Hadijah; Abu Kasim, Noor Hayaty , Modeling of porosity in hydroxyapatite for finite element simulation of nanoindentation test , Ceramics International , v 42, n 6, p 7543-7550, May, 2016

17 - Hossain, Anamul; Hossain, Altab; Nukman, Y.; Hassan, M.A.; Harizam, M.Z.; Sifullah, A.M.; Parandoush, P. , A Fuzzy Logic-Based Prediction Model for Kerf Width in Laser Beam Machining , Materials and Manufacturing Processes , v 31, n 5, p 679-684, April, 2016

18 - M. A. Hassan Amir Radzi Ab, Zahari Taha M.A.Hamdi, Mechanics of Energy Absorption by Progressive Plastic Deformation of a Square Column with an Ellipsoidal Bulge Base, Applied Mathematics & Information Sciences , Vol 9- No 11, pp 1-8, January, 2015

19 - A.I.M.Hassaballah, M. A. Hassan, N.A.Mardi and M.A.Hamdi, Modeling the effects of myocardiac fiber architecture and material properties on the left ventricle mechanics during rapid filling phase, Applied Mathematics & Information Sciences , Vol 9 - No1, pp. 161-167, January, 2015

20 - M. A. Hassan, Mohammed Elfiky , Y.Nukman1, Reza Mahmoodian, Monte Carlo Simulation Model for Magnetron Sputtering Deposition, Advanced Materials Research , Vol 1105, pp 69-73, June, 2015

21 - A. Fadi, M. Saad, Hazli, M. A. Hassan,, Dynamic Power Flow Control in Transmission Lines using Fuzzy Logic Based Unified Power Flow Controller, Applied Mathematics & information Sciences , (accepted), 2015

22 - Raza Moshwana, Farazila Yusof, M. A. Hassan, S. M. Rahmat, Dissimilar friction stir welding between polycarbonate and AA 7075 alloy International Journal of Materials Research, International Journal of Materials Research , Volume: 106 No: 3 , pp. 258-266 , March, 2015

23 - Raza Moshwan, Farazila Yusof M. A. Hassan, S. M. Rahmat, Effect of tool rotational speed on force generation, microstructure and mechanical properties of friction stir welded Al-Mg-Cr-Mn (AA 5052-O) alloy, Materials & Design , Elsevier, Vol 66 - No 5, pp. 118-128, February, 2015

24 - Moe Win, A. R. Bushroa, M. A. Hassan, N. M. Hilman,, Ari Ide-Ektessabi, A Contrast Adjustment Thresholding Method for Surface Defect Detection based on Mesoscopy , IEEE Transactions on Industrial Informatics, IEEE Transactions, Vol 11- No 3, pp 642-649, May, 2015

25 - Davoud Mashhadi Jafarlou, Erfan Zalnezhad, Abdelmagid Salem Hamouda, Ghader Faraji, Noor Azizi Bin Mardi, Mohsen Abdelnaeim Hassan Mohamed, Evaluation of the Mechanical Properties of AA 6063 Processed by Severe Plastic Deformation, Metallurgical and Materials Transactions A , Springer, Vol 46 No.6 , PP 2790-2798, April, 2015

26 - FADI ALBATSH, Saad Mekhilef, Shameem Ahmad, Hazlie Mokhlis and M. A. Hassan, Optimal Placement of Unified Power Flow Controllers to Improve Dynamic Voltage Stability Using Power System Variable Based Voltage Stability Indices , Plos One , Vol 10 No 4. , May, 2015

27 - Anamul Hossain, Altab Hossain , Y. Nukman, M. A. Hassan, M. Z. Harizam, A. M. Sifullah, P. Parandoush, A fuzzy logic based prediction model for kerf width in laser beam machining , Materials and Manufacturing Processes , Taylor & Francis, DOI:10.1080/10426914.2015.1037901, February, 2015

28 - Reza Mahmoodian; M. Hamdi; M.A Hassan; A. Akbari, Mechanical and Chemical characterization of a TiC/C system synthesized using a focus plasma arc , PLoS One , Public Library of Science, Vol 10 N0.6 , pp e0130836, June, 2015

29 - FADI ALBATSH, Saad Mekhilef, Shameem Ahmad, Hazlie Mokhlis and M. A. Hassan, Enhancing power transfer capability through flexible AC transmission system devices: A review, Frontiers of Information Technology & Electronic Engineering , Zhejiang University Press & Springer, 16 . Vol, 658-678 pp, March, 2015

30 - MA Hassan, AR Bushroa, Reza Mahmoodian, Identification of Critical Load for Scratch Adhesion Strength of Nitride-Based Thin Films Using Wavelet Analysis and a Proposed Analytical Model, Surface and Coatings Technology , Elsevier, Volume 277, No.15 , pp.216–221, September, 2015

31 - MA Hassan, IM Hassab-Allah, LMA Hezam, NA Mardi, M Hamdi, Deep Drawing of Asymmetric Cups through Conical Die without Blank Holder, Proceedings of the World Congress on Engineering Proceedings of the World Congress on Engineering 2015 Vol II WCE 2015, July 1 - 3, 2015, London, U.K. , ISBN: 978-988-14047-0-1 ISSN: 2078-0958 (Print); ISSN: , July, 2015

32 - Walid Mahmoud Shewakh, MA Hassan, Ibrahim M Hassab-Allah, Square-Cup Deep Drawing of Relatively Thick Sheet Metals through a Conical Die without Blankholder, International Journal of Materials Forming and Machining Processes (IJMFMP) , GI Global, Vol 2 No 2, pp 31-46, July, 2015

33 - DM Jafarlou, E Zalnezhad, MA Ezazi, NA Mardi, MA Hassan, The application of equal channel angular pressing to join dissimilar metals, aluminum alloy and steel, using an Ag-Cu-Sn interlayer, Materials & Design, 8, 2015

34 - Reza Mahmoodian, M. Hamdi, M.A Hassan, Ti-Based Ceramic Composite Processing using Hybrid Centrifugal Thermite Assisted Technique, 39th Int'l Conf & Expo on Advanced Ceramics & Composites (ICACC 2015), John Wiley & Sons, March, 2015

35 - R Mahmoodian, R Yahya, A Dabbagh, M Hamdi, MA Hassan , Investigation of embedded Si/C system exposed to a hybrid reaction of centrifugal-assisted thermite method , PLoS One, PUBLIC LIBRARY SCIENCE, 2015

36 - R Mahmoodian, M Hamdi, MA Hassan , Ti-Based Ceramic Composite Processing using Hybrid Centrifugal Thermite Assisted Technique , 39th Int'l Conf & Expo on Advanced Ceramics & Composites (ICACC 2015), John Wiley & Sons, January, 2015

37 - NM NikPa, AAD Sarhan, MA Hassan, MHA Shukor , Novel uses of SiO2 nanolubrication in end milling of medium carbon steel for higher compressive residual stress measured by high-energy X-ray diffraction data , Journal of Engineering Tribology, Part J, SAGE Publications, October, 2015

38 - WM Shewakh, MA Hassan, IM Hassab-Allah , Square-Cup Deep Drawing of Relatively Thick Sheet Metals through a Conical Die without Blankholder , International Journal of Materials Forming and Machining Processes (IJMFMP), IGI Global, July, 2015

39 - F. M. Albatsh, S. Ahmad, S. Mekhilef, H. Mokhlis and M. A. Hassan, Power Quality Improvement in Transmission Network using Fuzzy Logic based Unified Power Flow Controller, in the proceedings of IEEE International conference on Industrial Technology (ICIT), Seville, Spain, March 2015. , March, 2015

40 - A M Sifullah, Y Nukman, and M A Hassan , 3D FEM Simulation to Predict the Heat Affected Zone during Laser Machining on Stainless Steel 304 , International Conference on Mechatronics and Production Processes (ICMPP’2015), Pattaya (Thailand), Vol 1, Pp. 43-46, April, 2015

41 - Win, Moe; Bushroa, A.R.; Hassan, M.A.; Hilman, N.M.; Ide-Ektessabi, Ari , A contrast adjustment thresholding method for surface defect detection based on mesoscopy , IEEE Transactions on Industrial Informatics , v 11, n 3, p 642-649, June, 2015

42 - Moshwan, Raza(1); Rahmat, Sahifulddin M.(1); Yusof, Farazila(1); Hassan, Mohsen A.(1,2,3); Hamdi, Mohd(1); Fadzil, Mohd(1) , Dissimilar friction stir welding between polycarbonate and AA 7075 aluminum alloy , International Journal of Materials Research , v 106, n 3, p 258-266, 2015

43 - Hassan, M.A.; Bushroa, A.R.; Mahmoodian, Reza , Identification of critical load for scratch adhesion strength of nitride-based thin films using wavelet analysis and a proposed analytical model , Surface and Coatings Technology , v 277, p 216-221, September, 2015

44 - Naderi, S.; Hassan, M.A.; Bushroa, A.R. , Alternative methods to determine the elastoplastic properties of sintered hydroxyapatite from nanoindentation testing , Materials and Design , v 67, p 360-368, February, 2015

45 - Nikpa, Nik Masmiati; Sarhan, Ahmed Aly Diaa; Abdelnaeim Hassan, Mohsen; Hamdi Abd Shukor, Mohd , Novel uses of SiO2nanolubrication in end milling of medium carbon steel for higher compressive residual stress measured by high-energy X-ray diffraction data , Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology , v 230, n 6, p 697-708, 2015

46 - Belal Ahmed, M. A. Hassan, Saad Mekhelif, Fuzzy Swinging-up with Sliding Mode Control for Third Order Cart-Inverted Pendulum System, International Journal of Control, Automation and Systems, Vol 13 - No1, DOI: 10.1007/s12555-014-0033-4, February, 2014

47 - Devi CHANDRA, Judha PURBOLAKSONO, Yusoff NUKMAN, Haw-ling LIEW, Singh RAMESH, Mohsen-abdel HASSAN, Fatigue growth of a surface crack in a V-shaped notched round bar under cyclic tension, Journal of Zhejiang University SCIENCE A , Zhejiang University Press, Vol 15 No. 11, pp 873-882, November, 2014

Full text

48 - R. Mahmoudian, M.A. Hassan, M. Hamdy, Study of Ti+C combustion synthesis reaction in a controlled declining temperature state, Combustion Science and Technology , Taylor & Francis, Vol 186 No. 6, pp 737-746, June, 2014

Full text

49 - M. A. Hassan, R. Mahmodian, M. Hamdi, Modified smoothed particle hydrodynamics (MSPH) for the analysis of centrifugally assisted TiC-Fe-Al2O3 combustion synthesis, Scientific Reports , Nature.com, Vol 4 Article number:3724, DOI: 10.1038/03724, 2014

50 - A. I. M. Hassaballah, M. A. Hassan, N.A.Mardi and M.A.Hamdi, An Inverse Finite Element Method for Determining the Tissue Compressibility of Human Left Ventricle Wall during the Cardiac Cycle, PLOS ONE 8(12): e82703. doi:10.1371/journal.pone.0082703 , Vol 8 - No12, e82703. doi:10.1371/journal.pone.0082703, 2014

51 - R. mahmoudian, M. A. Hassan, M. Hamdi, Ali Dabagh, In-situ TiC-Fe-Al2O3-TiAl/Ti3Al composite coating processing using centrifugal assisted combustion synthesis , Composites Part B , Vol. 59 , pp. 279-284., 2014

52 - Fadi Albatish, Saad Mekhelif, Hazlie Mokhlis, Mohsen Hassan, D-Q model of Fuzzy based UPFC to control power flow in transmission network , Proceedings of the 7th IET international conference on Power Electronics, Machines and Drives, PEMD-2014, Manchester, UK. , IET Digital Library, DOI: 10.1049/cp.2014.0397, pp 5.3. 01-5.3. 01 , April, 2014

Full text

53 - Masmiati, Ahmed Sarhan, M. A. Hassan, M. Hamdi and H. S. Chan, Investigate the Possibility to Reduce the Residual Stress Level in 2.5D Cutting Using Titanium Coated Carbide Ball Endmill, Advances in Materials Science and Engineering , 2014 Vol, doi.org/10.1155/2014/485267, 8, 2014

54 - N. Sadjad, M. A. Hassan, A. R. Bushrao, An Empirical Modified Fatigue Damage Model for Impacted GFRP Laminates, Acta Astronautica , Elsevier, Vol 103, pp. 119-128, November, 2014

Full text

55 - M. A. Hassan, L. M. Hezam, M. G. Elsbaie, J. Purbolaksono, Deep drawing characteristics of square cups through conical dies , Procedia Engineering , Elsevier, Vol 81, pp 873-880, December, 2014

56 - J. Davoud, M. A. Hassan, N.M. Mardi, E. Nezhad , Influence of temper rolling on tensile property of low carbon steel sheets by application of Hill 48 anisotropic yield criterion, Procedia Engineering , Elsevier, Vol 81, pp 1222-1227, December, 2014

57 - Sadjaad, M.A. Hassan, Bushrao, Alternative Methods to Determine the Elastoplastic Properties of Sintered Hydroxyapatite from Nanoindentation Testing, Materials & Design , Elsevier, Vol 67 , PP 360-368, May, 2014

58 - Materials & Design, Low-velocity impact damage of woven fabric composites: Finite element simulation and experimental verification, Materials & Design , Elsevier, Vol 53, pp 706-718, January, 2014

59 - Belal Ahmed, M. A. Hassan, Saad Mekhlif , Decoupled Third-order Fuzzy Sliding Model Control For Cart- Inverted Pendulum System; , Journal of Applied Mathematics & Information Sciences, Natural Sciences publishing , Vol 7 No.1 , pp 193- 201, 2013

60 - A. Sadollah, M. A. Hassan, A. Bahreininejad , Optimum culture conditions for 1,3-Propanediol production from Crude Glycerol using metaheuristic algorithms, , Journal of Applied Mathematics and Information science letters, Natural Sciences Publishing, Vol 1, pp 1-8, 2013

61 - M. A. Hassan, C. J. Tan, K. Yamaguchi , A developed friction test for sheet metal stretch forming processes, International Journal of Surface Science and Engineering , Inderscience Publishers Ltd, Vol 7 No. 2, pp 152-170, January, 2013

62 - S. Ramesh, K.L. Aw, R. Tolouei, M. Amiriyan, C.Y.Tan, M. Hamdi, J. Puyrbolaksono, M. A. Hassan, W.D. Teng, Sintering properties of hydroxyapatite powders prepared using different methods, , Ceramics International, Eslevier, Vol 39, pp 111-119, 2013

63 - Nukman Y, Hassan M. A. and Harizam M .Z, Optimization of Prediction Error in CO2 Laser Cutting process by Taguchi Artificial Neural Network Hybrid with Genetic algorithm, Applied Mathematics & Information Sciences , Natural Sciences publishing , Vol 7 No.1 , pp 363-370, 2013

64 - M. A. Hassan, C. J. Tan, K. Yamaguchi, A Developed Friction Test for Sheet Metal Forming, International Journal of Surface Science and Engineering, Vol.7,No.2, PP.152-170, 2013

65 - Mahmoodian R, Rahbari RG, Hamdi M, Hassan MA & Sparham M., The Effects of An Unexpected Ceramic Coating Phase at the Head of a Pipe on Joining and Postprocessing of a Ceramic-Lined Composite Pipe., Journal of the Minerals, Metals and Materials Society, Vol.66,No.1, PP.80-85, 2013

66 - Ramesh, A. Yaghoubi, K.Y. Sara Lee, K.M. Christopher Chin, J. Purbolaksono, M. Hamdi, M.A. Hassan, Nanocrystalline forsterite for biomedical applications: Synthesis, microstructure and mechanical properties, Original Research Article, Journal of the Mechanical Behavior of Biomedical Materials, Vol.25, PP.63-69, September, 2013

67 - S. Ramesh, W.J. Kelvin Chew, C.Y. Tan, J. Purbolaksono, A. M. Noor, M. A. Hassan, U. Sutharsini, M. Satgunam & W.D. Teng, Influence of Manganese on the Sintering Properties of Tetragonal Zirconia, Ceramics Silikaty, Vol.57, No.1, PP.28-32 , 2013

68 - Hamza Belkame, Saad Mekhilef, Ammar Masaoud, Mohsen Abdel Naeim, Novel Three-phase Asymmetrical Cascaded Multilevel Voltage Source Inverter, IET Power Electronics, Vol. 6, Iss. 8, PP.1696 - 1706, 2013

69 - C.Y. Tan, A. Yaghoubi, S. Ramesh, S. Adzila, J. Purbolaksono, M.A. Hassan, M.G. Kutty, Sintering and mechanical properties of MgO-doped nanocrystalline hydroxyapatite, Ceramics International, vol.39,Issue 8, PP.8979-8983, 2013

70 - Reza Mahmoodian, M.A. Hassan, R.G. Rahbari, R. Yahya, M. Hamdi, A novel fabrication method for TiC Al2O3 Fe functional material under centrifugal acceleration, Composites Part B: Engineering, Vol.50, PP.187-192, July, 2013

71 - Amir Eadzi AB. Gani and M. A. Hassan, Axial Crush Behaviour of Square Column with Tapered External Plunger, Journal of Engineering science, Assiut University, Faculty of Engineering, Vol 41, No4, PP.v, 2013

72 - C.J. Tana, W.T. Chonga, M.A. Hassan, End Formation of a Round Tube into a Square Section having Small Corner Radii, Journal of Materials Processing Technology, vol.213, Issue 9, PP.1465:1474, September, 2013

73 - M. A. Hassan and Davoud Jafarlou, A Developed Process for Increasing Deep Rrawability of Rectangular Metal Cups with Extreme Aspect Ratio: Finite Element Simulation, International Journal of Mechanical and Materials Engineering, Vol. 8 No. 2, PP.11-24, 2013

74 - S. Ramesh, S. Azilaa, C. K. L. Jeffrey, C. Y. Tan, J. Purbolaksono, A. M. Noor, M. A. Hassan, I. Sopgan and W. D. Teng, Properties of Hydroxyappitite synthesize by wet chemical , Journal of Ceramics Processing Research,, Vol. 14- No. 4, pp. 448~452., 2013

75 - Mirhassani S. M., Ahmadian J., Ghorbanian M. J., Hassan M. A., Stability of geostationary flying satellite under combined sliding mode and PID control , Conference Proceeding:2013 IEEE Business Engineering and Industrial Applications Colloquium, BEIAC 2013, Langkawi; Malaysia; 01/2013 , IEEE, pp 115-119, April, 2013

76 - Amir R. A. Ghani and M. A. Hassan , AXIAL CRUSH BEHAVIOUR OF SQUARE COLUMN WITH EXTERNAL TAPERED PLUNGER, Journal of Engineering Sciences, Assiut University, Faculty of Engineering, 41- 4, July, 2013

77 - Nik Masmiati, Ahmed Aly Diaa Sarhan, Mohd Hamdi Abd Shukor, M. A. Hassan, "Investigate the Lubrication Effects on Cutting Force and Power Consumption in Up and Down End Milling", Advanced Materials Research , Vol 748, pp 264-286, 2013

78 - Nik, M. N., Ahmed A. D., Hamdi M., Hassan M. A, Investigate the Lubrication Effects on Cutting Force and Power Consumption in Up and Down End Milling, Advanced Materials Research , Vol 748, pp 264-268, October, 2013

Full text

79 - M Amiriyan, S Ramesh, R Tolouei, WJ Kelvin Chew, J Purbolaksono, MA Hassan, M Hamdi, WD Teng, Densification behavior of Y-TZP containing zirconium diboride composites, Journal of Ceramic Processing Research , Vol 13 No 3, pp 288-291, June, 2013

80 - KY Sara Lee, KM Christopher Chin, S Ramesh, J Purbolaksonoa, MA Hassan, M Hamdi, WD Teng, Characterization of forsterite ceramics, Journal of Ceramic Processing Research , Vol 14 No 1, pp 131-133, February, 2013

81 - M. A. Hassan, Khaled I. A., N. Takakura , A developed Process for Deep Drawing of Metal Foils Square cups, of Materials Processing Technology(ISI-Cited Publication) , Vol. 212 , pp. 295 307 , 2012

82 - M. A. Hassan, M. Hamdi, N. Noma , The Nonlinear Elastic and Viscoeleastic Passive Properties of Left ventricular Papillary Muscle of a Guiea Pig Heart, International, Journal of Mechanical behavior of biomedical materials, (ISI-Cited Publication) , Vol. 5 , pp. 99-109, 2012

83 - M.A. Hassan, M. A. EL-Sharief and A. Aboul-Kasem, A fuzzy model for evaluation, prediction and control of slurry erosion of ductile materials;, Materials and Design (ISI-Cited Publication) , Vol. 39 , pp.186-191, 2012

84 - R. A. Amir, Z. Taha, M. A. Hassan, , M. Hamdi , Effect of Slot on the Impact Response of Square Column, Adv. Sci. Lett., (ISI-Cited Publication) , Vol.13 , pp. 1-7, 2012

85 - M.A. Hassan, A. Aboul-Kasem and M. A. EL-Sharief, F. Yusef, Evaluation of the material constants of nitrile butadeine rubbers (NBR) with different carbon black loading(CB)FEM-simulation and experimental; Polymer, (ISI-Cited Publication) , Vol 53 (17) , pp. 3807-3814, 2012

86 - M. A. Hassan. M. A. E. Saleh, N. Takakura, S. Ramesh, J. Purbolaksono, Effect of bulge shape on wrinkling formation and strength of stainless steel thin sheet, Materials and Desig, ISI-Cited Publication, Vol.42, pp.37-45, 2012

87 - Purbolaksono, M. A. Hassan, S. Ramesh, High operating steam pressure and localized overheating of a primary superheater tube, Engineering Failure Analysis , Vol 26, pp 344-348, 2012

88 - M. Amiriyan1,a, W.J. Kelvin Chew2,b, S. Ramesh2,c, R. Tolouei, M.A. Hassan, A. Hossain,, Sopyan, S.Meenaloshini, Mechanical and Electrical Properties of Y-TZP/ZrB2 Composite, Advanced Materials Research, SCOPUS-Cited Publication , Vol. 576 , pp 228-231 , 2012

89 - K.Y. Sara Lee, K.M. Christopher Chin, S. Ramesh, C.Y. Tan, M.A. Hassan, J. Purbolaksono, W.D. Teng, Effect of Ultrasonication on Synthesis of Forsterite Ceramics. Advanced Materials Research, Advanced Materials Research , Vol 576, pp 252-255, November, 2012

90 - Shuaiby M. Shuaiby, M. A. Hassan, M .Taha , Modelling and simulation of the action potential in human cardiac Tissues using Finite element method, Journal of Communication and computer Engineering, Vol. 2/3, pp. 21:27, 2012

91 - M. A. Hassan, M. Hamdi, S. Naderi, F. Zahedi , Effect of curvature and thickness of Aluminum shell on the energy absorption in low velocity impact, Advanced Materials Research , SCOPUS-Cited Publication, Vol. 488-489, pp 40-45, 2012

92 - Shuaiby M. Shuaiby
Mohsen. A. Hassan
Moumen El-Melegy, Modeling and Simulation of The Action Potential In Human Cardiac Tissues Using Finite Element Method, Journal of Communication and computer Engineering, Volume 2, Issue 3, Pages 21: 27, 2012

93 - Shuaiby M. Shuaiby, M. A. Hassan, Abdel-Badie Sharkawy and Abdel-Rasoul M.M.Gad, A finite Element Model for the Electrical Activity in Human Cardiac Tissues, Journal of Ecology of Health & Environment , Vol. 1, No. 1 , PP:25-33, 2012

94 - M. A. Hassan, M. Hamdi, S. Naderi, F. Zahedi, Effect of curvature and thickness of Aluminum shell on the energy absorption in low velocity impact, Advanced Materials Research , Scientific,net, Vol 488, pp 40-45, March, 2012

Full text

95 - S. M.Mirhassani, J. Ahmadian, M. J. Ghorbanian, M. A. Hassan, Sliding mode and PID controller in geostationary satellite attitude control , Asia-Oceania Top University League on Engineering, 2012. AOTULE’12,, Kuala Lumpur Malaysia; November 2012. , November, 2012

96 - Ahmed A. D. Sarhan, M. A. Hassan, M. A. Hamdi, High-Precision Machining by Measuring and Compensating the Error Motion of Spindle's Axis of Rotation in Radial Direction., Engineering Letters , Vol 19 N0 4, pp 310-315, December, 2011

97 - M. A. Hassan, Ahmed A. D. Sarhan, A. Amano, Effect of Muscle Active Force and Fiber Orientation on the Left Ventricle Mechanics of Human Heart , Proceedings of the 2011 International Conference on Mechanical engineering, ICME 11, London, July 6-8, 2011, UK. , pp 2556-2561, July, 2011

98 - Amir Radzi, M. A. Hassan, M. Hamdi, Zahari Taha, Impact response of Multi Slotted square column, JMechE, Vol. 8, No. 2:, pp. 71-91, 2011

99 - N. Hatanaka, T. Iizuka, N. Takakura, K. Yamaguchi and M. A. Hassan, Friction aided deep drawing using blank holder divided into four segments, Journal of Japan Institute of Light Metals, Vol. 60(7) , pp.315- 320, 2010

100 - L. M. A. Hezam, M.A. Hassan, I. M. Hassab-Allah, and M. G. El-Sebaie, Development of a new process for producing deep square cups through conical dies. International, ISI-Cited Publication, Vol.49 , pp.733-780, 2009

101 - M. A. Hassan, Calibrating the Nonlinear elastic and viscoelatic tissue properties of ventricular myocytes from guinea pig heart, Journal of Engineering Science, Assiut University, Vol. 32-No.3 Part A, 2007

102 - M. A. Hassan, I. Kanno and H. Kotera, Compound two dimensional thermo-elastic and thermodynamic analysis for C-axis Oriented Epitaxial Lead Titanaet thin films, Int. J. Vacuum, Vol.81 issue 4 , pp.459-465. , 2006

103 - Y. Ichikawa, T. Matsunaga, M. A. Hassan, et al, Growth and structure of heteroepitaxial lead titanate thin films constrained by miscut strontium titanate substrates, J. Materials Research, JMR, Vol. 21 , pp. 1261-1268. , 2006

104 - M. A. Hassan and K. Kotera, A novel micro-device for measuring the electromechanical properties of a single myocyte, International Symposium on Development of Mechatronics Education, Egypt, 2006

105 - H. Kotera, N .Fujiwara, M. A. Hassan, Multi-functional cell mapping device, 4rd Assiut University Int. Conf. on Mech. Eng. Advanced Tech. for Indus. Prod. MEATP4, Egypt, 2006

106 - M. A. Hassan, R. Suenaga, N. Takakura and K. Yamaguchi, A novel process on friction aided deep drawing using tapered blank holder divided into four segments, Journal of Materials Processing Technology , Vol.159 , pp.418-425, 2005

107 - M. A. Hassan and Abouel-kasem, A Novel Friction Aided Deep Drawing Process for Producing Deep Square Cups, Eighth International Cairo University MDP Conference, Cairo-Egypt, Volume II, pp.961 , 2004

108 - M. A. E. Saleh and M. A. Hassan, Wrinkling inclusion into thin flat sheets; A proposed method for enhancing strength, Journal of Engineering Science, Assiut University, pp.1183-1197. , 2004

109 - A. Abouel-Kasem and M. A. Hassan, Sliding contact analysis of Viscoelastic cylinders, Proceeding of the eighth international Cairo-Egypt University MDP conference, pp. 101-111, 2004

110 - M. A. Hassan and A. Amano, Study of the effective boundary conditions in finite element simulation of the heart mechanics, 2nd Kyoto University international Symposium of Leading project for bio-simulation, Japan, 2004

111 - M. A. Hassan and K. Kotera, A novel micro-device for measuring the electromechanical properties of a single myocyte, International Conference on Micro Total Analysis Sweden, 2004

112 - M. A. Hassan, N. Takakura K. Yamaguchi, Friction aided deep drawing using newly developed blank-holder divided into eight segments. International, Journal of Machine Tools and Manufacture, Vol. 43, pp. 637-646, 2003

113 - M. A. Hassan, N. Takakura and K. Yamaguchi, A novel technique of Friction aided deep drawing using blank-holder divided into four segments, Journal of Materials Processing Technology, Vol.139 , pp.408-413, 2003

114 - M. A. Hassan, A Fuzzy model for prediction of flow-stress in metal forming, 3rd Assiut University Int. Conf. on Mech. Eng. Advanced Tech. for Indus. Prod. MEATP3 Egypt, Vol.2, Pp.411-417. , 2002

115 - M. A. Hassan, N. Takakura and K. Yamaguchi, Friction aided deep drawing of sheet metals using polyurethane ring and auxiliary metal punch, Part 1: experimental observations on deep drawing of aluminum thin sheets and foils, International , Journal of Machine Tools and Manufacture, Vol.42 , pp. 625-631, 2002

116 - M. A. Hassan, K. Yamaguchi and N. Takakura, A Fuzzy model for prediction of forming pressure in the Maslennikov s deep drawing process, JSME/ASME Int. Conf. on materials and processing, Hawai, ISI/SCOPUS Cited Publication, 2002

117 - M. A. Hassan, N. Takakura and K. Yamaguchi, Friction aided deep drawing of sheet metals using polyurethane ring and auxiliary metal punch, Part 2: analysis of the drawing mechanism and process parameters, International, Journal of Machine Tools and Manufacture, Vol. 42 , pp. 633-642, 2001

118 - M. A. Hassan, K. Yamaguchi and N. Takakura, A Fuzzy model for prediction of flow-stress in metal forming, Proceedings of the Int. Conf. on materials processing, Simulation of Materials Processing: Theory, Methods and Applications: Proceedings of the 7th International Conference on Numerical Methods in Industrial Forming Processes--NUMIFORM 2001, Toyohashi, Japan, 18-20 June 2001 , Taylor & Francis, pp 303-308, 2001

119 - M. A. Hassan, K. Yamaguchi and N. Takakura, A Novel technique on friction aided deep drawing using blank holder divided into four segments, Proceedings of the Ninth International Manufacturing Conference in China IMCC, ISI-Cited Publication, Vol. 1, Pp.21-22, 2000

120 - M. A. Hassan, I. M. Hassaballa, M. A. E. Saleh& M.G. El- Sebaie, Finite element simulation of OSU friction test, Proc. The Fifth Int Conf. on Production Engineering and design, For Development PEDD5, Ein Shams, Non-ISI/Non-SCOPUS Cited Publication, pp.213-226, 1998

Supervisions :

1- Labib mdhish Ali hzam, Deep drawing Characteristics of square cups through conical dies without blank holder, Ph. D., 25 October 2009
Supervisors : Mohamed Gad El-Sibai, Ibrahim Mohamed hsp allah, Mohsen Abd el-Naeem Hassan

2- Reza Mahmoudian, Development of Manufacturing techniques for Self Propagation High Temperature Syntheses , Ph. D., 25 June 2013
Supervisors : Mohsen Bdelbaeim hassan, Mohd Hamdi

3- Belal Ahmed Abdelaziz Elsayed, Development of a nonlinear Fuzzy controller for Mechatronics Application, M. Sc, 25 October 2012
Supervisors : Prof. Saad Mekhlif ( Malaysia ) Assoc. Prof. Mohsen Abdelnaeim Hassan (Egypt)

4- Davoud Mashhadi Jafarlou, A Novel Process for Increasing Deep Drawability of Rectangular Metal Cups with Extreme Aspect Ratio: Design and Simulation, M. Sc, 25 July 2012
Supervisors : Assoc. Prof. Mohsen AbdelNaeim Hassan Mohamed

5- Azhar Bin Abdul Satar, Finite Element Simulation and Experimental Verification of Temper Rolling Process of Low Carbon Steel Sheet, M. Sc, 25 June 2013
Supervisors : Assoc. Prof. Mohsen Abdelnaeim Hassan Mohamed

6- ABDALLAH IBRAHIM MOHAMED HASABALLA, FINITE ELEMENT ANALYSIS OF HUMAN LEFT VENTRICLE MOTION AND MECHANICAL PROPERTIES, M. Sc, 26 May 2014
Supervisors : Prof. Madya Dr. Mohsen Abdel Naeim Hassan Mohamed Dr. Noor Azizi Mardi (Malaysia)

7- Amir Radzi bin Ab Ghani, IMPACT RESPONSE OF ALUMINIUM SQUARE COLUMN UNDER NEWLY DEVELOPED TRIGGER MECHANISMS, Ph. D., 29 May 2014
Supervisors : Asscoaite Prof. Dr Mohsen Abdelnaeim Hassan Mohamed Prof. Dr. Muhd Hamdi bin Abdul Shakur ( UM, Malaysia ) Prof. Dr Zahai Taha ( UMP, Malaysia )

8- MOHAMMAD ALBAHY ABDUL HAMID ALFIKY, MODELLING AND SIMULATION OF MAGNETRON SPUTTERING PROCESS, M. Sc, 5 June 2014
Supervisors : Associate Professor Dr. Mohsen Abdelnaeim Hassan Mohamed

9- Hamza BelKamel, DESIGN OF A NEW THREE-PHASE CASCADED HALF-BRIDGE MULTILEVEL INVERTER, M. Sc, 19 September 2014
Supervisors : Prof. Dr. Saad Mekhilef Assoc. Prof. Dr. Mohsen Abdel Naeim Hassan Mohamed

10- Raza Moshwan , Friction Stir Welding of Aluminum Alloy (AA5052): Experimental and Simulation, M. Sc, 3 December 2014
Supervisors : Professor Dr Mohsen Abdelbaeim Hassan Mohamed (Egypt) Dr. Farazila Yusof ( Malaysia)

11- Mofleh Alwazani, Modeling and Simulation of a Micro Tactile Sensor for Soft Tissue Stiffness Detection, M. Sc, 15 January 2015
Supervisors : Prof. Dr Mohsen Abdelnaeim Hassan Mohamed

12- Hassan Tariq AL-Mashhadani, Modeling and Simulation of a Aquad Copter using PID Controllers , M. Sc, 19 January 2015
Supervisors : Prof. Dr Mohsen Abdelnaeim Hassan Mohamed

13- Ahned Khalaf Mosa, On Fuzzy Logic and Fuzzy system : Modelling and applications, Ph. D., 28 March 2012
Supervisors : Prof. Ahmed Mohamed Zahran Prof. Mohamed Azab Abdullah Dr. Mohsen Abdelnaeim Hassan

14- Nik Masmiati Binti Nik , Influences of cutting parameters and lubrication modes on residual stresses and surface integrating quality of milled machined metals , Ph. D., 12 June 2015
Supervisors : Prof. Dr.Mohd Hamdi Abd Shukor, Prof. Dr. Mohsen Abdelnaeim Hassan Associate prof. Ahmed Aly Diaa

15- Davoud Jafrluo, A Developed deep drawing process for producing rectangular cups with extreme aspect ratio, M. Sc, 26 June 2013
Supervisors : Pror. Dr. Mohsen Abdelnaeim Hassan Mohamed

16- Daial Hussein Algabouri , Non-deterministic Methods for modelling and simulation of Physical vapour coating process. , M. Sc, 18 June 2015
Supervisors : Prof. Dr. Mohsen Abdel naeim Hassan Mohamed

17- Nadri Sadjad, Damage Behaviour of Glass Fiber Reinforced Polymer Laminate and Bovine=Derived Hydroxyapatite Under Low Velocity Impact Loading, Ph. D., 21 August 2015
Supervisors : Professor Dr Mohsen AbdelNaeim Hassan Mohamed Dr Bushroa Binti Abdel Razak

18- Fadi M. Albatsh,, Fuzzy Based Unified Power Flow Controller for Increasing Power Transfer Capability: Simulation and Hardware Implementation, Ph. D., 9 December 2015
Supervisors : Professor Saad Mekhlif (Malaysia) Associate professor Hazli Mokhles (Malaysia) Professor Mohsen Abdelnaein Hassan

19- Moe Win, DEVELOPMENT OF A MESOSCOPIC IMAGING SYSTEM FOR SURFACE INSPECTION, Ph. D., 15 January 2016
Supervisors : Dr BUshrao Binti Abdel Razak Prof. Mohsen Abdel Naeim Hassan

20- Maayad ABU Ramaila, A PC-Based Simulation Platform for a Quadcopter System with Self-Tuning Fuzzy PID Controllers, M. Sc, 9 September 2016
Supervisors : Prof. Dr. Mohsen Abdelnaeim Hassan Mohamed Dr. Azizi ( Malaysia)

21- Ahmed Abdel-Aleeim , Optimisation of inventory production systems with imperfect products , M. Sc, 13 December 2016
Supervisors : Prof. Dr Mohamed Gad Elsebaei Prof. Dr Mohsen Abdelnaeim Hassan Dr Mahoud El-Shreif

22- ABU MOHAMMED SIFULLAH, STUDYING THE FUSION CUTTING MECHANISM IN CO2 LASER BLANKING OF STAINLESS STEEL-304 SQUARE SAMPLES, M. Sc, 1 April 2017
Supervisors : الدكتور نكمان بن يوسف الأستاذ الدكتور محسن عبد النعيم حسن محمد