Back

 
Dr. Ahmed Aly Diaa Mohammed Sarhan

Associate Professor, Department of Mechanical Engineering , Faculty of Engineering, ِِAssiut University

C.V Details




Print copy Member login MIS Data

 

 

Current Address

:

Malaysia, Kuala Lumpur, University of Malaya, Mechanical Engineering Department

Office Tel.

:

031150

Home Tel.

:

0060379674593

Mobile No.

:

0060379674593

Fax No.

:

0060379675330

E-Mail

:

ahmed.sarhan@eng.au.edu.eg
ah_sarhan@yahoo.com

google scholar link

:

http://scholar.google.com.my/citations?user=lw2cEiEAAAAJ&hl=en
Educational Qualifications:
  • Ph. D. In Mechanical Engineering ( Precision Engineering ) , Faculity of Engineering, Kyoto University - japan, 2007
  • M. Sc. In Mechanical Engineering ( Manufacturing Engineering ) , Faculity of Engineering, Assiut University, 1999
  • B. Sc. In Mechanical Engineering ( Manufacturing Engineering ) , Faculity of Engineering, Assiut University, 1992
  • Associate Professor, Department of Mechanical Engineering , Faculty of Engineering, ِِAssiut University, 2013
  • Lecturer, Department of Mechanical Engineering , Faculty of Engineering, Assiut University, 2007
  • Assistant Lecturer, Department of Mechanical Engineering , Faculty of Engineering, Assiut University, 1999
  • Demonstrator, Department of Mechanical Engineering , Faculty of Engineering, Assiut University, 1992

Research fields:
Computer Integrated Manufacturing , Cutting Tool Technology , Non-Conventional Machining , Machining

Publications:

1 - Hourmand, Mehdi; Sarhan, Ahmed A. D.; Sayuti, Mohd , Micro-electrode fabrication processes for micro-EDM drilling and milling: a state-of-the-art review , International Journal of Advanced Manufacturing Technology , v 91, n 1-4, p 1023-1056, July, 2017
2 - Dambatta, Yusuf S.; Sarhan, Ahmed A. D.; Sayuti, M.; Hamdi, M. , Ultrasonic assisted grinding of advanced materials for biomedical and aerospace applications—a review , International Journal of Advanced Manufacturing Technology , v 92, n 9-12, p 3825-3858, October, 2017
3 - Hourmand, Mehdi; Sarhan, Ahmed A.D.; Noordin, Mohd Yusof , Development of new fabrication and measurement techniques of micro-electrodes with high aspect ratio for micro EDM using typical EDM machine , Measurement: Journal of the International Measurement Confederation , v 97, p 64-78, February, 2017
4 - Maher, Ibrahem; Sarhan, Ahmed A. D. , Proposing a new performance index to identify the effect of spark energy and pulse frequency simultaneously to achieve high machining performance in WEDM , International Journal of Advanced Manufacturing Technology , v 91, n 1-4, p 433-443, July, 2017
5 - Ibrahim, Mahmoud Z.; Sarhan, Ahmed A.D.; Yusuf, Farazila; Hamdi, M. , Biomedical materials and techniques to improve the tribological, mechanical and biomedical properties of orthopedic implants – A review article , Journal of Alloys and Compounds , v 714, p 636-667, 2017
6 - Sparham, Mahdi; Sarhan, Ahmed A.D.; Mardi, N.A.; Dahari, M.; Hamdi, M. , Cutting force analysis to estimate the friction force in linear guideways of CNC machine , Measurement: Journal of the International Measurement Confederation , v 85, p 65-79, May, 2016
7 - Besharati, S.R.; Dabbagh, V.; Amini, H.; Sarhan, Ahmed A.D.; Akbari, J.; Hamdi, M.; Ong, Z.C. , Multi-objective selection and structural optimization of the gantry in a gantry machine tool for improving static, dynamic, and weight and cost performance , Concurrent Engineering Research and Applications , v 24, n 1, p 83-93, March, 2016
8 - Akhtari Zavareh, Mitra; Mohammed Sarhan, Ahmed Aly Diaa; Akhtari Zavareh, Parisa; Basirun, Wan Jeffrey, Electrochemical corrosion behavior of carbon steel pipes coated with a protective ceramic layer using plasma and HVOF thermal spray techniques for oil and gas , Ceramics International , v 42, n 2, p 3397-3406, 2016
9 - Masmiati, Nik; Sarhan, Ahmed A.D.; Hassan, Mohsen Abdel Naeim; Hamdi, Mohd , Optimization of cutting conditions for minimum residual stress, cutting force and surface roughness in end milling of S50C medium carbon steel , Measurement: Journal of the International Measurement Confederation , v 86, p 253-265, May, 2016
10 - Paria, S.; Baradaran, S.; Amiri, Ahmad; Sarhan, A.A.D.; Kazi, S.N. , Performance evaluation of latent heat energy storage in horizontal shell-and-finned tube for solar application , Journal of Thermal Analysis and Calorimetry , v 123, n 2, p 1371-1381, February, 2016
11 - Zavareh, Mitra Akhtari; Sarhan, Ahmed Aly Diaa Mohammed; Zavareh, Parisa Akhtari; Razak, Bushroa Binti Abd; Basirun, Wan Jeffrey; Ismail, Mokhtar B. Che , Development and protection evaluation of two new, advanced ceramic composite thermal spray coatings, Al2O3-40TiO2and Cr3C2-20NiCr on carbon steel petroleum oil piping , Ceramics International , v 42, n 4, p 5203-5210, March, 2016
12 - Rahmati, B.; Sarhan, Ahmed. A.D.; Zalnezhad, E.; Kamiab, Z.; Dabbagh, A.; Choudhury, D.; Abas, W.A.B.W. , Development of tantalum oxide (Ta-O) thin film coating on biomedical Ti-6Al-4V alloy to enhance mechanical properties and biocompatibility , Ceramics International , v 42, n 1, p 466-480, 2016
13 - Marashi, H.; Jafarlou, D.M.; Sarahan, A.A.D.; Mardi, N.A. , Employing severe plastic deformation to the processing of electrical discharge machining electrodes , Precision Engineering , v 46, p 309-322, October, 2016
14 - Marashi, Houriyeh; Jafarlou, Davoud M.; Sarhan, Ahmed A.D.; Hamdi, Mohd , State of the art in powder mixed dielectric for EDM applications , Precision Engineering , v 46, p 11-33, October, 2016
15 - Akhtari Zavareh, Mitra; Sarhan, Ahmed Aly Diaa Mohammed; Razak, Bushroa Bintiabd; Basirun, Wan Jeffrey , The tribological and electrochemical behavior of HVOF-sprayed Cr3C2-NiCr ceramic coating on carbon steel , Ceramics International , v 41, n 4, p 5387-5396, May, 2015
16 - Ooi, Ming Erh(1); Sayuti, Mohd; Sarhan, Ahmed A.D. , Fuzzy logic-based approach to investigate the novel uses of nano suspended lubrication in precise machining of aerospace AL tempered grade 6061 , Journal of Cleaner Production , v 89, p 286-295, February, 2015
17 - Barzani, Mohsen Marani; Sarhan, Ahmed A.D.; Farahany, Saeed; Ramesh, Singh; Maher, Ibrahem , Investigating the machinability of Al-Si-Cu cast alloy containing bismuth and antimony using coated carbide insert , Measurement: Journal of the International Measurement Confederation , v 62, p 170-178, February, 2015
18 - Sarhan, Ahmed A.D.; Matsubara, Atsushi , Investigation about the characterization of machine tool spindle stiffness for intelligent CNC end milling , Robotics and Computer-Integrated Manufacturing , v 34, p 133-139, 8, 2015
19 - Maher, Ibrahem; Hui Ling, Liew; Sarhan, Ahmed A.D.; Hamdi, M., Improve wire EDM performance at different machining parameters - ANFIS modeling , IFAC-PapersOnLine , v 28, n 1, p 105-110, February, 2015
20 - Masmiati, N.; Sarhan, Ahmed A.D. , Optimizing cutting parameters in inclined end milling for minimum surface residual stress - Taguchi approach , Measurement: Journal of the International Measurement Confederation , v 60, p 267-275, January, 2015
21 - Usop, Zuriani; Sarhan, Ahmed A.D.; Mardi, N.A.; Wahab, Md. Nizam Abd , Measuring of positioning, circularity and static errors of a CNC Vertical Machining Centre for validating the machining accuracy , Measurement: Journal of the International Measurement Confederation , v 61, p 39-50, February, 2015
22 - Besharati, S.R.(1); Dabbagh, V.(1); Amini, H.(1); Sarhan, Ahmed A. D.(1,2); Akbari, J.(1,3); Hamdi, M.(1) , Nonlinear Dynamic Analysis of a New Antibacklash Gear Mechanism Design for Reducing Dynamic Transmission Error , Journal of Mechanical Design, Transactions of the ASME , v 137, n 5, May, 2015
23 - Nikpa, Nik Masmiati; Sarhan, Ahmed Aly Diaa; Abdelnaeim Hassan, Mohsen; Hamdi Abd Shukor, Mohd , Novel uses of SiO2nanolubrication in end milling of medium carbon steel for higher compressive residual stress measured by high-energy X-ray diffraction data , Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology , v 230, n 6, p 697-708, 2015
24 - Marani Barzani, Mohsen; Zalnezhad, Erfan; Sarhan, Ahmed A.D.; Farahany, Saeed; Ramesh, Singh , Fuzzy logic based model for predicting surface roughness of machined Al-Si-Cu-Fe die casting alloy using different additives-turning , Measurement: Journal of the International Measurement Confederation , v 61, p 150-161, February, 2015
25 - Marashi, Houriyeh; Sarhan, Ahmed A.D.; Hamdi, Mohd , Employing Ti nano-powder dielectric to enhance surface characteristics in electrical discharge machining of AISI D2 steel , Applied Surface Science , v 357, p 892-907, December, 2015
26 - Rahmati, B.; Zalnezhad, E.; Sarhan, Ahmed A.D.; Kamiab, Z.; Nasiri Tabrizi, B.; Abas, W.A.B.W. , Enhancing the adhesion strength of tantalum oxide ceramic thin film coating on biomedical Ti-6Al-4V alloy by thermal surface treatment , Ceramics International , v 41, p 13055-13063, June, 2015
27 - MA Ezazi, MM Quazi, E Zalnezhad, Ahmed AD Sarhan, Enhancing the tribo-mechanical properties of aerospace AL7075-T6 by magnetron-sputtered Ti/TiN, Cr/CrN & TiCr/TiCrN thin film ceramic coatings, Ceramics International, 2014
28 - N Masmiati, HS Chan, Ahmed AD Sarhan, MA Hassan, M Hamdi, Investigating the Possibility to Reduce the Residual Stress Level in 2.5D Cutting Using Titanium Coated Carbide Ball End Mill, Hindawi Publishing Corporation , 2014
29 - Mitra Akhtari Zavareha,Ahmed Aly Diaa Mohammed Sarhana,Bushroa Binti Abd Razaka, Wan Jeffrey Basirunb, Plasma thermal spray of ceramic oxide coating on carbon steel with enhanced wear and corrosion resistance for oil and gas applications, Ceramics International, Volume 40, Issue 9, Part A, November, 2014
30 - IbrahemMaher & M. E. H. Eltaib & Ahmed A. D. Sarhan & R. M. El-Zahry , Cutting force-based adaptive neuro-fuzzy approach for accurate surface roughness prediction in end milling operation for intelligent machining, International Journal of Advanced Manufacturing Technology , Centre of Advanced Manufacturing and Material Processing-Springer-Verlag London 2014, Int J Adv Manuf Technol (2015) 76:1459–1467, 1459–1467, http://www.researchgate.net/publication/265785871, September, 2014
Full text
31 - …, MEH Eltaib, AAD Sarhan, RM El-Zahry, Investigation of the effect of machining parameters on the surface quality of machined brass (60/40) in CNC end milling—ANFIS modeling, International Journal of the Physical Sciences Vol. 6(10), , Int J Adv Manuf Technol (2014) 74:531–537, 531–537, 2014
32 - Nik, M. N., Ahmed A. D., Hamdi M., Hassan M. A., (MQL) Lubrication for Better Surface Quality and More Safe Environments in End-Milling, International Symposium on Green Manufacturing and Applications (ISGMA 2013) on June 25~29, 2013, Ohau, Hawaii, USA , 2013
33 - E. Zalnezhad, Ahmed. A. D. Sarhan, (Presenter), M. hamdi , Adhesion Strength Predicting of Cr/CrN Coated Al7075 Using Fuzzy Logic System for Fretting Fatigue Life Enhancement, International Conference on Soft Computing and Applications (ICSCA'13), Proceedings of the World Congress on Engineering and Computer Science WCECS , Vol. I, pp. 589-595, October, 2013
34 - E. Zalnezhad, Ahmed A. D. Sarhan, M. Hamdi, Optimizing the PVD TiN Thin Film Coating s parameters on Aerospace AL7075-T6 Alloy for Higher Coating Hardness and Adhesion with Better Tribological Properties of the Coating Surface, International Journal of Advanced Manufacturing Technology , Vol. 64 - No. 1-4, pp. 281-290, January, 2013
35 - M. Sayuti, Ahmed A. D. Sarhan, M. Hamdi, An investigation of optimum SiO2 nanolubrication parameters in end milling of aerospace Al6061-T6 alloy, International Journal of Advanced Manufacturing Technology , Vol. 67 - No.1-4, pp. 833-849, July, 2013
36 - E. Zalnezhad, Ahmed A. D. Sarhan, M. Hamdi, Investigate the Effects of Hard Anodizing Parameters on Surface Hardness of Hard Anodized Aerospace AL7075-T6 Alloy Using Fuzzy logic approach for Fretting Fatigue Application, International Journal of Advanced Manufacturing Technology, Vol. 68 - No. 1-4, pp. 453-464, 2013
37 - H. Adibi, S.M. Rezaei, Ahmed A. D. Sarhan , Analytical Modeling of Grinding Wheel Loading Phenomena, International Journal of Advanced Manufacturing Technology, Vol. 68 - No. 1-4, pp. 473-485, http://dx.doi.org/10.1007/s00170-013-4745-z, September, 2013
38 - E. Zalnezhad, Ahmed A. D. Sarhan, M. Hamdi, Surface Hardness Prediction of CrN Thin Film Coating on AL7075-T6 Alloy Using Fuzzy Logic System, International Journal of Precision Engineering and Manufacturing, Vol. 14 - No. 3, pp. 467-473, http://www.springerlink.com/openurl.asp?genre=article&id=doi:10.1007/s12541-013-0063-5, March, 2013
39 - S. Baradarana, W. J. Basirunb, E. Zalnezhad, M. Hamdi, Ahmed A.D. Sarhan, Y. Alias, Fabrication and deformation behaviour of multilayer Al2O3/Ti/TiO2 nanotube arrays, Journal of the Mechanical Behavior of Biomedical Materials, Vol. 20, pp. 272 – 282, http://dx.doi.org/10.1016/j.jmbbm.2013.01.020, April, 2013
40 - M. Emami, M. H. Sadeghi, Ahmed A. D. Sarhan, Investigating the Effects of Liquid Atomization and Delivery Parameters of Minimum Quantity Lubrication on the Grinding Process of Al2O3 Engineering Ceramics, Journal of Manufacturing Processes, Vol.15 - No. 3, pp.374–388, http://dx.doi.org/10.1016/j.jmapro.2013.02.00, 2013
41 - E. Zalnezhad, Ahmed A. D. Sarhan, M. Hamdi, Fretting Fatigue Life Evaluation of Multilayer Cr-CrN Coated Al7075-T6 with Higher Adhesion Strength-Fuzzy Logic Approach, International Journal of Advanced Manufacturing Technology, Vol. 69 - NO. 5-8, pp. 1153-1164, http://dx.doi.org/10.1007/s00170-013-5093-8, November, 2013
42 - Mansour S.Farhan, Erfan. Zalnezhad, Abdul. Razak. Bushroa, Ahmed Aly Diaa Sarhan, Electrical and Optical Properties of Indium-tin Oxide (ITO) Films Prepared by Ion-Assisted Deposition (IAD) at Room Temperature, International Journal of Precision Engineering and Manufacturing, Vol. 14 - No. 8, pp. 1465-1469, http://link.springer.com/article/10.1007%2Fs12541-013-0197-5, 2013
43 - Mohsen Emami, Mohammad Hossein Sadeghi, Ahmed A.D. Sarhan, , Minimum Quantity Lubrication in Grinding Process of Zirconia (ZrO2) Engineering Ceramic, International Journal of Mining, Metallurgy and Mechanical Engineering (IJMMME), Vol. 1 - No. 3, pp. 187-190, http://www.isaet.org/proceeding.php?catid=69&type=5&mode=detail, 2013
44 - Ahmed. A. D. Sarhan(Presenter), N. K. Siong, Sayuti, The 15th IEEE Saudi Technical Exchange Meeting (STEM) conference, King Fahd University of Petroleum & Minerals, Dhahran, Saudi Arabia, 5th AUN/SEED-Net Regional Conference on Mechanical and Aerospace Technology, Bangkok, February, 2013
45 - Nik, M. N., Ahmed A. D., Hamdi M., Hassan M. A, Investigate the Lubrication Effects on Cutting Force and Power Consumption in Up and Down End Milling, Advanced Materials Research , Vol 748, pp 264-268, October, 2013
Full text
46 - E. Zalnezhad, Ahmed A. D. Sarhan, M. Hamdi, Investigating the fretting fatigue life of thin film titanium nitride coated aerospace Al7075-T6 alloy, Materials Science and Engineering: A , V.559, PP 436-446, http://dx.doi.org/10.1016/j.msea.2012.08.123, January, 2013
47 - M. Sayuti, Ahmed A. D. Sarhan, S. Salem, Development of SiO2 Nanolubrication System for better surface Quality, More Power Savings and Less Oil Consumption in Hard Turning of Hardened Steel AISI4140, Advanced Materials Research , Vol. 748, pp. 56-60, March, 2013
48 - Ahmed A. D. Sarhan, E. Zalnezhad, M. Hamdi, , The influence of Higher Surface Hardness on Fretting Fatigue Life of Hard Anodized aerospace AL7075-T6 Alloy, International Journal of Materials Science & Engineering A , Vol. 560, pp. 377-387, http://dx.doi.org/10.1016/j.msea.2012.09.082, January, 2013
49 - Ahmed A. D. Sarhan, M.Sayuti, M. Hamdi, Reduction of power and lubricant oil consumption in milling process using a new SiO2 nanolubrication system, International Journal of Advanced Manufacturing Technology , Vol. 63 - No. 5-8, pp. 505-512, http://www.springerlink.com/content/a3357l71563g2683/, November, 2012
50 - H. Adibi, S.M. Rezaei, Ahmed A. D. Sarhan, A Novel Method for Determination of Grinding Wheel Loading, Journal of Applied Sciences, pp. 71-78, http://www.cjasr.com/images/manuscripts/November%202012/CJASR-12-13-119.pdf, 2012
51 - E. Zalnezhad, Ahmed A. D. Sarhan, M. Hamdi, Babak Asri, A Fuzzy Logic Based Model to Predict the Fretting Fatigue Life of Aerospace Al7075-T6 Alloy, Journal of Applied Sciences , Vol. 1 - No. 12, pp. 39-48, http://www.cjasr.com/images/manuscripts/December%2020121/CJASR-12-14-147.pdf, 2012
52 - Ahmed A. D. Sarhan(Presenter), Atsushi Matsubara, Investigation on the Machine tool Spindle and/or Bearing Thermal Error Motions, 7th International Conference on MicroManufacturing (ICOMM 2012), Northwestern University, Evanston, Illinois, Chicago, USA, pp. 42-46, March, 2012
53 - Ahmed A. D. Sarhan(Presenter), Atsushi Matsubara, Investigate the Characterization of the Machine Tool Spindle Stiffness in Radial Direction for Precise Monitoring of Cutting Forces for Intelligent Machining, Canadian Society for Mechanical Engineering (CSME) International Congress, 2012, Winnipeg, Manitoba, , June, 2012
54 - Ahmed A. D. Sarhan(Presenter), N.S.M EL-TAYEB, Prediction of Burnishing Surface Roughness of Brass using Fuzzy Rule Based System, 5th AUN/SEED-Net – RC ManuE 2012, EDSA Shangri-La Manila, Ortigas Center, Mandaluyong City, Philippines, November, 2012
55 - Ahmed A. D. Sarhan(Presenter), Atsushi Matsubara, Modeling of Machine Tool Spindle Stiffness for Accurate Monitoring of Cutting Forces for Intelligent Machining, The 15th IEEE Saudi Technical Exchange Meeting (STEM) conference, King Fahd University of Petroleum & Minerals, Dhahran, Saudi Arabia, December, 2012
56 - M. A. Hassan, Ahmed A. D. Sarhan, A. Amano, Effect of Muscle Active Force and Fiber Orientation on the Left Ventricle Mechanics of Human Heart Proceedings of the 2011 International Conference on Mechanical engineering, ICME 11, London, ISI-Cited Publication , Vol .III, pp2556-2561, 2011
57 - Ahmed A.D. Sarhan, and R. M. El-Zahry, Monitoring of Tool Wear and Surface Roughness in End-Milling for intelligent machining, International Journal of the Physical Sciences , Vol. 6 - No.10 , pp. 2380 2392, http://www.academicjournals.org/ijps/abstracts/abstracts/abstract2011/18May/Sarhan%20and%20El-Zahry.htm, 2011
58 - Ahmed A. D. Sarhan, M. A. Hassan, Atsushi Matsubara, and M. Hamdi, High-Precision Machining by Measuring and Compensating the Error Motion of Spindle s Axis of Rotation in Radial Direction, International Journal of Engineering Letters , Vol. 19 - No. 4, pp. 310-315, http://www.engineeringletters.com/issues_v19/issue_4/index.html, 2011
59 - Ahmed A. D. Sarhan, Atsushi Matsubara, Compensation Method of the Machine Tool Spindle Thermal Displacement for Accurate Monitoring of Cutting Forces, International Journal of Materials and Manufacturing Processes, Vol. 26 - No. 2, pp. 1511-1521, http://www.tandfonline.com/doi/abs/10.1080/10426914.2010.544825, 2011
60 - M.Sayuti, Ahmed A. D. Sarhan ,M. Hamdi, Development of nanoparticle suspended lubrication system in machining process for less power consumption and pollution, United Kingdom - Malaysia - Ireland Engineering Science Conference (UMIES 2011), University of Malaya, Kuala Lumpur, Malaysia , July, 2011
61 - Ahmed A. D. Sarhan*1 and R. M. El-Zahry2 1Department of Engineering Design and Manufacture, Faculty of Engineering Building, University of Malaya, 50603 Kuala Lumpur, Malaysia. 2Department of Mechanical Engineering, Faculty of Engineering, Assiut University, Assiut 71516, Egypt., Monitoring of tool wear and surface roughness in end milling for intelligent machining, International Journal of the Physical Sciences Vol. 6(10), pp. 2380-2392, 18 May, 2011, Academic Journals, Vol. 6(10), 2380-2392, http://www.academicjournals.org/IJPS, April, 2011
Full text
62 - Ahmed A. D. Sarhan, Atsushi Matsubara, Tomohiro Yasuda, Development of a Cutting Force Monitoring System for Intelligent Machining, International Symposium on Flexible Automation, Osaka, Japan, pp.18-21 , 2006
63 - Ahmed A. D. Sarhan, Atsushi Matsubara, Motoyuki Sugihara,Hidenori Saraie, Soichi Ibaraki, Yoshiaki Kakino, Monitoring Method of Cutting Force by Using Additional Spindle Sensors, JSME International Journal, Series C, Vol.49, No.2, pp.307-315 , 2006
64 - Atsushi Matsubara, Motoyuki Sugihara, Ahmed A. D. Sarhan,Hidenori Saraie, Soichi Ibaraki, Yoshiaki Kakino, Research on Spindle and Machining Process Monitoring for Intelligent Machine Tools, 3rd International Conference on Leading Edge Manufacturing in 21st Century LEM21-2005, Nagoya, Japan, pp.469-474, 2005
65 - Ahmed A. D. Sarhan, Atsushi Matsubara, Soichi Ibaraki, and Yoshiaki Kakino, Monitoring of Cutting Force using Spindle Displacement Sensor, USA Symposium on Flexible Automation, Denver, Colorado Japan , 2004
66 - Atsushi Matsubara, Sarhan Ahmed ,Iwao Yamaji, Soichi Ibaraki, Hidenori Saraie, Yoshiaki Kakino, Monitoring of Machining Process by Using Spindle Displacement Sensors, 5th JSME Manufacturing and Machine Tool Conference, Osaka University, pp.27-28 , 2004
67 - A. Sarhan, R. Sayed, A. A. Nasr, and R. M. El-Zahry, Interrelation Between Cutting Force Variation and Tool Wear in End-Milling, Journal of Materials Processing Technology, Vol.109, No.3, pp 229-235, 2001
68 - A. Sarhan, R. Sayed, A. A. Nasr, and R. M. El-Zahry, Force Based Model for Automated Surface Roughness Prediction in Slot Milling, ASME International Design Engineering Technical Conferences and the Computers and Information in Engineering Conference, Pittsburgh, Pennsylvania, V. 3, pp. 31-47, 2001
69 - A. Sarhan, R. Sayed, A. A. Nasr, and R. M. El-Zahry, Monitoring of Tool Wear in End Milling Using Cutting Force Modeling, Engineering Design Conference ’98 (EDC98), Brunel University, United kingdom, 1998

Awards and Grants :

1 - " " in Engineering Sciences, 2011.
2 - " " in Engineering Sciences, 2011.
3 - " " in Engineering Sciences, 2012.
4 - " " in Engineering Sciences, 2012.
5 - " " in Engineering Sciences, 2012.
6 - " " in Engineering Sciences, 2012.
7 - " " in Engineering Sciences, 2012.
8 - " " in Engineering Sciences, 2013.
9 - " " in Engineering Sciences, 2013.
10 - " " in Engineering Sciences, 2013.
11 - " " in Engineering Sciences, 2013.
12 - " " in Engineering Sciences, 2013.
Number of courses0 course