Skip to main content

Finding a common ground for RCM experiments. Part B: Benchmark study on ethanol ignition

مؤلف البحث
RD Büttgen, M Preußker, D Kang, S Cheng, SS Goldsborough, Gani Issayev, Aamir Farooq, H Song, Yann Fenard, Guillaume Vanhove, A Abd El-Sabor Mohamed, HJ Curran, KA Heufer
المشارك في البحث
تاريخ البحث
سنة البحث
2024
مجلة البحث
Combustion and Flame
الناشر
Elsevier
عدد البحث
262
صفحات البحث
113338
موقع البحث
https://www.sciencedirect.com/science/article/pii/S0010218024000488
ملخص البحث

Rapid compression machines (RCMs) are widely used to investigate gas phase reaction kinetics of various kind of fuels at application relevant conditions. In principle, the operation of an RCM is based on the idea of compressing a homogenous pre-mixed fuel-air mixture by a piston. Usually creviced pistons ensure a homogenous adiabatic core in the center of the reaction chamber which permits the assumption of an isentropic relation between the measured pressure and gas temperature. Despite the ideal core gas compression, non-ideal effects such as heat loss, differences in the compression behavior, and ultimately non-standardized design and operation of rapid compression machines lead to different experimental results in different facilities at nominally the same end of compression conditions.

In this study ignition delay times of ethanol are investigated at four different conditions in five independent RCMs. As expected, the raw results of the different facilities indeed show notable differences at the same end of compression conditions. However, according to the adiabatic core hypothesis the agreement between kinetic simulations and experiments should be consistent for all facilities provided that the facility effects are correctly accounted for. To elaborate upon this hypothesis, a kinetic mechanism is optimized to reflect the experimental results of all facilities. In the end, the optimized mechanism predicts all experimental data within the expected uncertainty. This confirms the reliability of RCM experiments for kinetic investigations and the validity of the effective volume approach in simulating RCM data.

Research Rank
International Journal